Adjusting The Input Signal Monitoring Mix - Zoom H6 Operation Manual

Adjusting the input signal monitoring mix

You can adjust the level and panning of each input signal for the monitoring mix.
1.
Press .
2.
Use to select
"INPUT&OUTPUT",
and press
3.
Use to select
"Monitor Mixer",
and press
4.
Change parameters as
desired.
■ Mixing controls
Move cursor/change value:
Select parameter to change:
76
.
.
Move up/down
Press
Parameter Setting range
Mute, −48.0 – +12dB
Volume
(in 0.5dB increments)
Panning L100 – CENTER – R100
NOTE
• The use of volume and panning settings only affect the
monitoring signal. They do not affect the recorded data.
• Use the Project Mixer to adjust the balance during play-
back. (→ P. 42)
5.
Press to listen to
the project without mixer
adjustments.
Pressing this button turns the
mixer settings on and off.
NOTE
These mix settings are saved with each recorded project
separately. Mix settings can also be applied during play-
back. (→ P. 42)
Explanation
Adjusts track volume
Adjusts left–right
position of sound.