General Machine Settings
Auto clear
After a copy job or fax job is completed, the machine will automatically return
all temporary copy settings or all temporary fax settings to the default settings
if 60 seconds elapses without any keys being pressed on the operation panel.
If desired, you can change the amount of time that must elapse to 30 seconds
or 120 seconds, or turn auto clear off so that temporary settings are never
automatically cleared.
1
COPY
Press
(or
2
Press
.
3
Press a number key to select the
desired setting:
: 30 SEC
: 60 SEC
: 120 SEC
: OFF
4
Press
repeatedly to exit.
48
SCAN
MENU
) and then
.
Display:
COMMON SETTING
1: 30 SECONDS
The display briefly shows
your selection, then:
3: KEY TONE