Shark S3501 Owner's Manual page 5

5
QUICK TIP:
For easier
pushing
and pulling,
extend the
handle length.
6
PREPARE
5 For your comfort, you can adjust
the height of the mop. Just lift the
latch on the tube 90 degrees to the
open position. Holding the handle,
extend the tube to the height that's
right for you and then close latch
to locked position.
6
Plug in mop and wait 30 seconds
or less for the mop to heat up.
Pump the handle of the mop by
pushing downward about 10 to 12
times to create steam.
NOTE: Steam is created
automatically when you start
mopping.
DIRT CAN'T HIDE ON
EITHER SIDE! All new
design allows for optimal
cleaning! When one side
of the pocket gets dirty,
just turn the mop head
over and clean with the
other side of the pocket.
QUICK TIPS: We've added
an additional mop head.
You can now choose from a
Rectangle mop head for all
the rooms in your house or
the Triangle mop head that
is perfect for bathrooms
and tight spaces.
NOTE: Do not leave your
Steam Mop unattended
during use.
IMPORTANT: Never leave
the steam mop in one spot
for any period of time with
a damp or wet micro-fiber
pocket attached as this will
damage your floors.
www.sharkcompany.com