Risk of injury caused by rotating roller brush.
You can injure yourself on the rotating roller brush.
Switch the vacuum cleaner off before dealing with any problems. Use the On/
Off switch on the Comfort handle to do this.
Error messages are displayed with a quick flashing light on the battery charging
state indicator on the PowerUnit.
Problem
Top indicator is flashing
quickly
Bottom and top indicat-
ors are flashing quickly
Bottom and middle in-
dicators are flashing
quickly
Cause and remedy
"Comfort handle not recognised" error
Remove the Comfort handle and reconnect it (see
"Installation and connection – Connecting the
Comfort handle").
Remove the battery, wait for 10 seconds and rein-
sert it.
Internal system error
Remove the battery, wait for 10 seconds, reinsert
it and charge it.
"Battery overheating" or "Battery not recognised" er-
ror
Wait for approximately 30 minutes before switch-
ing the vacuum cleaner back on again.
Insert an original Miele AP01/AP02/AP03 lithium-
ion rechargeable battery (HX LA).
Error messages
37