Repeat Play - Sanyo DC-TS760 Instruction Manual

Picture zoom (Pin point zoom) [DVD]
1. Press the SHIFT + 3 ZOOM buttons during normal, slow or still play.
The pin point guide screen appears.
- If you quit the screen, press the SHIFT + 3 ZOOM buttons.
2. Press the 4, a, 5 or b button, then the ENTER, or press the number
button to select the zoom point.
The screen is magnified. "
If necessary, press the 4, a, 5 or b button repeatedly to move the
screen.
3. Press the SHIFT + 3 ZOOM buttons again. The screen is magnified
more than " 1". "
4. Press the SHIFT + 3 ZOOM buttons to return to the original screen.
Note:
Picture zoom may not work on some discs.
Viewing from a desired camera angle (Multi-Angle)
[DVD]
Some DVD discs may contain scenes which have been shot simultaneously
from a number of different camera angles. The jacket or case of discs that
are recorded with angles will be marked.
Example:
Note: The recorded angles differ depending on the disc used.
1. Play the disc that is recorded with angles.
2. Press the SHIFT + 1 ANGLE buttons repeatedly until the desired
angle appears.
Example:
Angle replay [DVD]
During Multi-angle play screen, press the SHIFT + 2 A.REPLAY buttons.
The unit skips back to last approximately 10 seconds, changes it to the
next camera angle and plays it, and continues play. (If desired, press the
buttons again.)
15
1 3 3 /5 2 3 4 5 6
1" appears briefly on the screen.
2" appears briefly.

Repeat play

Press the REPEAT button during play of the title (or track) you want to
repeat. Each time the button is pressed, the repeat mode changes as
follows.
TV screen Display Operation
[DVD]
Chapter REP. 1 Repeat of chapter being played
Title ALL REP. Repeat of title being played
Off Repeat off mode
[VCD] [CD]
1 REP. 1 Repeat of track being played
All ALL REP. Repeat all tracks
Off Repeat off mode
During programmed play [VCD] [CD]
Program 1 REP. 1 Repeat of track being played
Program All ALL REP. Repeat all programmed tracks
Off Repeat off mode
Designated range repeat play (A-B Repeat)
1. Press the A-B REP button during play at the beginning of the section
you want to repeat (Point A). "
A-" appears and "A-" blinks on the display.
2. Press the A-B REP button again at the end of the section (Point B).
"REP. A-B" remains lit on the display.
The section between points A and B is played repeatedly.
3. To return to normal play, press the A-B REP button again.
Note:
Repeat play or A-B repeat play mode may not work correctly with some
discs.
Notes on using Video CD with PBC
To use the repeat play or A-B repeat play mode, select PBC off play mode
as follows.
In the stop mode, press the number buttons to select the track number
then press the a (Play) button.
Random play [CD]
1. Press the PROGRAM/RANDOM button once in the stop mode.
"Random" appears on the screen and "RND" blinks on the display.
2. Press the a (Play) button to begin random play. "RND" remains lit. The
unit will automatically select tracks at random.
Note:
The A-B REP and SEARCH MODE buttons do not work during random
play.
A-" appears on the screen. "REP.