Advertisement
Quick Links
Thank you for purchasing this Devon bed. Please read the instructions carefully before use to ensure safe
and satisfactory operation of this product.
Please check the pack contents before attempting to assemble this product. A full checklist of components
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING, to avoid personal injury and (or) damage to the product.
This product takes approximately 60 MINUTES to assemble with 2 PEOPLE.
If you require any additional information or have any issues with this product please call the John
Lewis Helpline on 01244 689949 or email mail@fwgroup-uk.com.
Devon 120cm Bed
SMALL PARTS which should be KEPT AWAY FROM YOUNG CHILDREN.
Stock code 803/61603, 803/61703, 803/61803
For product support or spare parts
please call the John Lewis Helpline;
T: 01244 689949
E: mail@fwgroup-uk.com
Advertisement
Related Manuals for John Lewis Devon 803/61603
Summary of Contents for John Lewis Devon 803/61603
- Page 1 Thank you for purchasing this Devon bed. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. For product support or spare parts please call the John Lewis Helpline; T: 01244 689949 E: mail@fwgroup-uk.com Please check the pack contents before attempting to assemble this product.
- Page 4 Step 1 Insert dowels (D) in to the pre drilled holes on the side rails (3). Insert barrel nut (C) in to the pre drilled holes underneath side rails (3) and on the inside top of the side rail (3). Secure the side rails (3) to the head board (1) using bolts (B) as shown below.
- Page 5 Step 3 Secure the centre rail (4) to the head board (1) and foot board (2), by pushing the bracket down in to place as shown below.
- Page 6 PLEASE NOTE : slat to the other end of the bed using screws (G) ensuring there are no gaps between the slats and head boa rds. Finally, secure the rest of the slats in to place using screws (G) as shown below. Tighten using a philips head screw driver.
- Page 7 Wood Furniture ray’ which can appear on oak furniture is a mark of good quality timber - these are just characterisitics of the natural beauty of the wood. Some furniture is also deliberately aged and rustic. drawer fronts by the way the slivers are arranged. All timber surfaces will change colour and mellow over time.
- Page 8 This product complies with BS 8509 : 2008...