Page 1
Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact the John Lewis Helpline. This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
Page 2
Fitting and parts checklist Fittings M4 Allen Key x 1 Screw 4 x 25mm x 2 M8 Spring Washer x 8 M5 Allen Key x 1 Centre Caps x 15 M8 Washer x 8 Screw 3.5 x 18mm x 4 Side Caps x 30 M8 X 35mm Bolt x 8 M6 X 25mm Bolt x 2...
Page 3
Step One Starting with the Headboard (1) attach the Side Rails (3) using the inserted M8 x 35mm Bolt (E), M8 Spring Washer (G) and M8 Washer (H). Please do not tighten the bolts yet.Now attach the Footboard (2) to the Side Rails(3) using M8 x 35mm Bolt (E), M8 Spring Washer (G) and M8 Washer (H).
Page 4
Step Three Next secure the bracket with Screw 3.5x18mm (I) on the Headboard (1) and Footboard (2) as shown in fig. 5. Attach the metal clip on the Headboard (1) to the Side Rail (3) and make any adjustment needed. Ensure all parts align together and secure with Screw 4x25mm (F) as shown in fig.
Page 5
Step Five With the curved side facing upwards, Insert 2 Slats (4) into a Centre Cap (C) followed by a Side Cap (D) onto the other end of both Slats. Use your palms to push down the Side Caps into the Side Rails and Centre Caps to the Centre Rail as shown in diagram below.
This product complies with BS EN 1725:1998. If you require any additional information or have any issues with this product please call the John Lewis Helpline on 01244 689949 or email mail@fwgroup-uk.com John Lewis Partnership 171 Victoria Street, London, SW1E 5NN.