Using Two Monitors For Monitoring - Sanyo DSR-3016 Instruction Manual

VIEWING CAMERA IMAGES

Using two monitors for monitoring

If you connect a monitor to the MON2 output terminal on the rear panel, you can display the images from each camera as single-screen images or
show an automatic switching screen on monitor 2, even while the main monitor is showing a split-screen display. In addition, the camera images
can be shown in a single-screen display during playback, and when an alarm occurs, the alarm camera images can be automatically sent to
monitor 2. The default setting is automatic switching of a single screen.
Operating monitor 2
Press the MON2 button.
The MON2 indicator Lights.
MON2
Displaying single-screen camera 4 images on
monitor 2
Press camera select button 4.
The images from camera 4 appear on monitor 2 in a single-screen
display.
SEQUENCE
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
Monitor 2
Changing monitor 2 from single-screen display to
automatic switching
Press the SEQUENCE button.
The camera images being displayed on monitor 2 will switch
automatically.
To cancel automatic switching, press the SEQUENCE button once
more.
SEQUENCE
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
Monitor 2
English
Main monitor
SHUTTLE
JOG
Monitor 2
Main monitor
０１ ０１ ０１ ０２ ０２ ０２ ０３ ０３ ０３
０５ ０５ ０５ ０６ ０６ ０６ ０７ ０７ ０７
JOG SHUTTLE
０９ ０９ ０９ １０ １０ １０ １１ １１ １１
１３ １３ １３ １４ １４ １４ １５ １５ １５
Monitor 2
０１ ０１ ０１
０１ ０１ ０１
Displaying single-screen alarm images on monitor 2
When an alarm is received, the alarm images will be displayed on
monitor 2 as single-screen images.
Note: If alarm images are being displayed on monitor 2, change the
"MON.2 DISPLAY" setting in the (ALARM OPERATION SET)
menu to "ON". (See page 66.)
Canceling monitor 2 display
Press the MON2 button once more.
The MON2 indicator switches off.
MON2
０４ ０４ ０４
０８ ０８ ０８
１２ １２ １２
１６ １６ １６
19
External Camera
alarm number