Power For The Camera - Sanyo Xacti VPC-E6EX Instruction Manual

POWER FOR THE CAMERA

The supplied AC adaptor is used not only as the camera's AC adaptor, but
also to charge the battery installed in the camera.
Using the battery pack
At the time of purchase, the battery pack is not charged. The battery pack
must be charged before it can be used in the camera. Also, if the battery
power becomes depleted when the camera is being used (see CHECKING
THE REMAINING BATTERY PACK CHARGE [page 138]), it should be
recharged as soon as possible.
1
Install the battery pack.
Battery/card cover
(on the camera bottom)
Battery pack
(+) (–) mark
18
English