Setting Up Your French Door Refrigerator; Getting Ready To Install The Refrigerator - Samsung RF26V User Manual

Setting up your French Door Refrigerator

GETTING READY TO INSTALL THE REFRIGERATOR
Congratulations on your purchase of the Samsung French Door Refrigerator. We hope you enjoy the state-of-art
features and efficiencies that this new appliance offers.
Selecting the best location for the Refrigerator
• A location with easy access to the water supply.
• A location without direct exposure to sunlight.
• A location with level (or nearly level) flooring.
• A location with enough space for the Refrigerator doors to open easily.
• Allow sufficient space for air circulation of the internal cooling system.
If the Refrigerator does not have enough space, the internal cooling
system may not work properly.
If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When you install
the refrigerator next to a fixed wall, minimum clearance is 3 ¾" (95mm) between the refrigerator and wall to allow
the door to swing open.
First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways
(both width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of Samsung French Door Refrigerator.
MODEL
Capacity(Cu.Ft)
Case Height
Dimension (inch)
Depth
• Allow clearance to the right, left, back and top when installing. This will help reduce power
consumption and keep your energy bills lower.
• Do not install the Refrigerator where the temperature will go below 50 ºF (10 ºC).
When moving your refrigerator
To prevent floor damage be sure the front levelling legs are
in the up position (above the floor). Refer to 'Levelling the
refrigerator' in the manual.
To protect the finish of the flooring, place the protection
sheet such as packing carton under the refrigerator.
When installing, servicing or cleaning behind the refrigerator,
be sure to pull the unit straight out and push back in straight
CAUTION
after finishing.
8_ Setting Up
RF267,RF26V
Width (A)
with Hinge (B)
without Hinge (C)
with Door (D)
without Door (E)
26
35 ¾
70 C C
68 ⅝
35 ⅝
29 ⅛
Control Lever
A A
E E
D D
B B
Screwdriver