Use The Wps Wizard For Wifi Connections - NETGEAR MR70 User Manual

Nighthawk Mesh WiFi 6 System with MR70 router and MS70 satellite
9. Unless you select None in the previous step, set a WiFi password in the Password
(Network Key) field.
You must enter a phrase of 8 to 63 characters or 64 hexadecimal digits. The Password
(Network Key) field displays if you select the WPA2-PSK [AES], WPA-PSK [TKIP]
+ WPA2-PSK [AES], or WPA3-Personal security radio button.
10. Click the Apply button.
Your settings are saved.
11. Make sure that you can reconnect over WiFi to the guest network.
If you cannot connect over WiFi, check the following:
• If your computer or mobile device is already connected to another WiFi network
in your area, disconnect it from that WiFi network and connect it to the WiFi
network that the router provides.
Some WiFi devices automatically connect to the first open network without WiFi
security that they discover.
• Does your computer or mobile device display as an attached device?
If it does, it is connected to the guest network.
• Are you using the correct network name (SSID) and password?

Use the WPS wizard for WiFi connections

The WPS Wizard helps you add a WPS-enabled device to your WiFi network without
typing the WiFi password.
To use the WPS Wizard:
1. Launch a web browser from a computer or mobile device that is connected to your
mesh network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > WPS Wizard.
A note explaining WPS displays.
Manage WiFi Settings 64 User Manual