Stihl HT 105 Instruction Manual page 19

Hide thumbs Also See for HT 105:
Table of Contents

Advertisement

Available languages

Available languages

Twist fuel cap (ca. 1/4 turn)
N
Markings on fuel cap and oil tank must
align
Remove the fuel cap
N
Filling up with chain oil
Fill up with chain oil
N
Take care not to spill chain oil during
refilling and do not overfill the tank.
STIHL recommends use of the STIHL
filling system for chain oil (special
accessory).
HT 105, HT 134, HT 135
To close:
Clip is in an upright position:
Fit the fuel cap – marks on the fuel
N
cap and oil tank must line up.
Push the fuel cap down as far as it
N
will go
Hold the fuel cap down and twist it
N
clockwise until it engages
Then the markings on fuel cap and oil
tank will align
Close the bracket lock
N
The fuel cap is locked
If the oil level in the tank does not go
down, the reason may be a problem in
the oil supply system: Check chain
lubrication, clean the oilways, contact
your dealer for assistance if necessary.
STIHL recommends that maintenance
and repair work be carried out only by
authorised STIHL dealers.
If the fuel cap will not lock onto the oil
tank
The base of the fuel cap is tilted in
relation to the upper part.
Remove the fuel cap from the oil
N
tank and look at it from above
English
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ht 134Ht 135

Table of Contents