Inserting The Battery; Connecting The Electrobrush - Miele HS19 Operating Instructions Manual

Installation and connection
 Push the PowerUnit connector into
the suction tube from above until it
audibly clicks into place (right image
detail).
 Press the release catch to separate
the individual sections from each
other.

Inserting the battery

 Push the battery along the guide lines
until it audibly clicks into place in the
PowerUnit.
20
 If you want to separate the sections
again, press both release catches at
the side of the battery to remove the
battery.

Connecting the Electrobrush

Depending on how you decide to con-
figure your vacuum cleaner, you can
connect either the PowerUnit connector
or the suction tube connector to the
Electrobrush.
 Push the connector into the Electro-
brush from above until it audibly
clicks into place.