Changing The Picture Options; Advanced Settings - Samsung BN68-02604B-04 User Manual

4. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution)
y
[Optimum: 1920 X 1080 pixels]
If a vertical-frequency option exists on your display
y
settings dialog box, the correct value is '60' or '60 Hz'.
Otherwise, just click 'OK' and exit the dialog box.

Changing the Picture Options

¦

Advanced settings

O
m → Picture → Advanced settings →
MEnU
EnTERE
(available in standard / Movie mode)
Compared to previous models, new Samsung TVs have
more precise pictures.
✎
In PC mode, you can only make changes to
Contrast, gamma and White Balance.
Advanced Settings
Black Tone
Dynamic Contrast
Shadow Detail
Gamma
RGB Only Mode
Color Space
White Balance
U Move E Enter R Return
Bla ck Tone (Off / Dark / Darker / Darkest): Select the
■
black level to adjust the screen depth.
Dynamic Contrast (Off / low / Medium / high)
■
Adjust the screen contrast.
shadow Detail : Increase the brightness of dark images.
■
✎
Disabled under PC mode.
g amma: Adjust the primary color intensity.
■
RgB Only Mode (Off / Red / green / Blue)
■
the Red, green and Blue color for making fine
adjustments to the hue and saturation.
Color space (Auto / native)
■
available to create the image.
White Balance : Adjust the color temperature for a more
■
natural picture.
R-Offset / g-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
R-gain / g-gain / B-gain: Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
Flesh Tone : Emphasize pink "flesh tone".
■
Edge Enhancement (Off / On)
■
boundaries.
POWER
P
Dynamic
: Off ►
: Medium
: 0
: 0
: Off
: Native
▼
:
FAV.CH
: Displays
: Adjust the range of colors
S.MODE
: Emphasize object
Picture Options
O
MEnU m → Picture → Picture Options →
EnTERE
✎
In PC mode, you can only make changes to the
Tone, size and Auto Protection Time.
Color Tone
Size
Digital Noise Filter
MPEG Noise Filter
HDMI Black Level
Film Mode
Auto Protection Time
Color Tone (Cool / normal / Warm1 / Warm2)
■
✎
or Warm2 will be deactivated when the
Warm1
picture mode is Dynamic.
✎
Settings can be adjusted and stored for each
external device connected to an input on the TV.
size : Your cable box/satellite receiver
■
SLEEP
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
4:3: Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention (screen
burn) which are not covered by the warranty.
screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are input.
✎
nOTE
x
After selecting
1. Press the ► button to select Position.
2. Press the EnTERE button.
3. Press the ▲ or ▼ button to move the picture up
or down.
4. Press the EnTERE button.
5. Press the ► button to select Reset.
6. Press the EnTERE button to reset the picture
to its default position.
Picture Options
: Normal
: 16:9
: Auto
: Auto
: Normal
: Off
CHLIST
INFO
: 2 hours
U Move E Enter R Return
P.MODE
MTS
CC
Zoom1, Zoom2 or Wide Fit:
English
Color
►
P.SIZE
MEDIA.P
15