Output of any external source connected to RJP on hotel desk.
USB
HDMI
S-VIDEO RCA AUDIO/PC
RJP Rear
1. Connect the
PC IN / PC/DVI AUDIO IN
2. Connect the
AV IN [VIDEO]/[L-AUDIO-R]
3. Connect the
AV IN [VIDEO]
4. Connect the
HDMI
5. Connect the
port of the TV and the RS/232 port of the RJP.
RJP
✎
The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA-7660
(HD Plus).
y RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio
Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are connected
from RJP to TV. The RJP communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests
to connect an external source to the RJP. The RJP communicates with the TV by sending messages regarding Active/
Inactive sources. The TV will switch to the Active external source according to the priority set by the User.
✎
You can select
✎
When the TV is on, connect the TV and the
y The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons simultaneously for 10
seconds. All LEDs blink 5 times to Acknowledge that the rest has been performed.
y The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room. The
LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart. If the
guest then touches another source button, the TV will change to the selected source and the corresponding LED will be lit.
y After an RJP Reset or a TV Power OFF/ON, it takes approx. 10 seconds to establish communications between the TV and
the RJP.
20
English
LC452_453_457-hotel.indd 20
Connecting the RJP (Remote Jack Pack)
4 HDMI cable
ANT IN
ANT IN
1 D-sub / PC Audio cable
2 Video / Audio Cable
3 Audio Cable
port of the TV to the PC/AUDIO port of the RJP.
port of the TV to the S-VIDEO port of the RJP.
port of the TV to the S-VIDEO port of the RJP.
port of the TV and the HDMI port of the RJP.
HDMI 1, 2, 3
and
AV 1, 2
for connecting RJP.
5
TV Rear Panel
5Vdc/2.5A
5Vdc/2.5A
(12Vdc/1.5A)
(12Vdc/1.5A)
RJP
within 10 seconds.
TV Side Panel
or
2010-04-12 오후 8:37:31