Samsung 452 Installation Manual page 16

Warning
When you use the DC power output jack, you have to check the standard output
power of STB(SBB) and you should use the DC power within the standard
output(Class 2 Wiring-5V DC/2.5A (12V DC/1.5A).
For 5V SBB, SBB load current must not exceed 2.5A.
–
For 12V SBB, SBB load current must not exceed 1.5A.
–
The initial output is 5V.
–
For 12V SBB, you have to change the output voltage to 12V in order to use
–
the power.
Changing the Output Voltage (Only for EU C457 26" 32" 37" 40" model)
1. Press the POWER
✎
The TV is powered on.
2. Press the following remote control buttons in order.
→ → 0 → 1 →
INFO MENU
✎
The Hotel Option menu appears.
3. Press the ▲ or ▼ button to select DC Power Output.
Press the ◄ or ► button to select 12V or 5V.
4. Remove the power cord then plug it back in again.
✎
The voltage change is applied when you turn the TV on
again after changing the Interactive mode Option setting.
16
English
LC452_453_457-hotel.indd 16
button.
EXIT
Hotel Mode RJP Priority AV
ON
SI Vendor Samsung RJP Priority PC
Power On Channel 1 RJP Priority HDMI
Channel Type RJP AV Option
ATV
Power On Volume 10 RJP HDMI Option HDMI1
Min Volume 0 Sub AMP Volume
Max Volume Sub AMP Mode
100
Panel Button Lock Local Time
Unlock Manual
Power On Source Time Format
TV 12 Hour
Picture Menu Lock PMOLED Test
OFF Failure
Channel Editor PMOLED Mormal Dim.
Music Mode AV OFF PMOLED Standby Dim.
Music Mode PC Audio Loop In
OFF OFF
Music Mode Comp OFF Menu Display
Music Mode Backlight Hotel Logo
OFF OFF
Logo Download
1 ...
2 Logo Display Time ...
3 Power On Option Last Option
Auto Source
AV1 OFF
Energy Saving Off
6 Clone : TV to USB
Clone : USB to TV
2
Pan Euro MHEG
OFF
Cloning Data Reset
OFF
Welcome Message
3 Edit Welcome Message
2 DC Power Out 5V
Channel Auto Store
ON Dynamic SI OFF
2010-04-12 오후 8:37:29