Technical Specifications - Samsung SFT-202 Instruction Manual

Technical Specifications:

Electrical Specification
Video Inputs:
Video Outputs:
Audio Inputs:
Audio Outputs:
Mains power:
Connectors
4 x Phono/RCA:
RS232:
Modulator/Bypass:
Satellite IF input:
Satellite IF loop out:
Tuner
Loop though Digital tuner with LNB input, and loop output
Full power loop through supported
Frequency Range at LNB input:
Input connector:
Impedance:
Input sensitivity:
LNB supply voltages
Supply voltage software switchable:
Current limit:
Software controlled LNB power on/off
LNB 22kHz Tone switching:
0/12V accessory switch:
Demodulator and FEC
Demodulator:
Type:
Filtering:
Input symbol rate:
Forward Error Correction:
Code rates supported:
Amplitude:
Frequency:
Duty Cycle:
Full DiSEqC specification V1.0 supported
Universal LNB supported
Software controlled on/off
Input impedance 75
0.7V pk-pk on R/G/B,
1V pk-pk on CVBS/Y
Output impedance 75
0.7V pk-pk on R/G/B,
0.1V pk-pk on CVBS/Y into 75 load.
Input impedance >50k AC coupled
Output impedance 600 AC coupled
Minimum load impedance 20k
90-250VAC 50-60Hz
Composite video out
0/12V out
Audio left
Audio right
9 Way D RS232 DCE serial port
UHF in/out IEC male/female or:
VHF in/out F-type (country dependent)
F-type
F-type
920-2150MHz
F-type female
75
-30 to -65dBm
13V/18V
0 to 400mA
0.6Vpp ( 0.2V)
22KHz
50% ( 20%)
Software controlled on/off
Fully DVB compliant
QPSK
0.2 or 0.35 Square root raised cosine
2 Msps to 45 Msps fully variable
1/2, 2/3, 3/4, 5/6, 7/8 (Auto Sensed)
27
2KHz