Table of Contents
Advertisement
Trouble shooting:
If you suspect there is a fault with your receiver, please check the following trouble shooting guide
before calling an authorised service agent.
Warning! Under no circumstances attempt to repair the receiver yourself. Tampering with the
receiver may result in fatal electric shock and will invalidate your warranty.
Symptom:
No receiver display
Receiver is ON, but no picture or sound
Receiver is on, no picture or sound except
menus
Interference on picture, sound OK
Interference on picture, noisy audio
Receiver not responding to remote
Possible cause:
Check that the receiver is plugged in and
there is power at the mains socket.
Check that your TV is switched on
Channel scrambled.
Check tuning and set-up
Check Signal and Data levels.
Dish moved or LNB is faulty.
Local TV interference, tune the
output to another channel, or connect to
TV via SCART or phonos.
Press Signal key and check if Signal and
Data levels are good enough.
Check remote batteries and that the
receiver IR sensor is not covered
(marked IR on the front panel).
26
Advertisement
Table of Contents
