Camera Setup; Record Setup - Samsung NETWORK DIGITAL VIDEO RECORDER User Manual

Exit from the SYSTEM SETUP menu

3. CAMERA SETUP

CAMERA SETUP
> CAMERA SELECT
CAMERA RECORD
MOTION DETECTION
MOTION SENSITIVITY
BRIGHTNESS
CONTRAST
HUE
EXIT
Contents:
CAMERA SELECT
Use ◄ or ► button to select the camera from CAM 1 – CAM 4 to be adjusted.
2
CAMERA RECORD
Use ◄ or ► button to select ON/OFF recording.
3
MOTION DETECTION
Use ◄ or ► button to select ON/OFF motion detection.
4 MOTION SENSITIVITY(1~10)
Use ◄ or ► button to adjust sensitivity of motion detection for selected camera. Initial
number from 1 to 10, default value is 5(STANDARD).
5
BRIGHTNESS STANDARD(1~10)
Use ◄ or ► button to adjust the brightness of the selected camera. Initial number is 5
(STANDARD).
6
CONTRAST STANDARD(1~10)
Use ◄ or ► button to adjust the contrast of the selected camera. Initial number is 5
(STANDARD).
7 HUE STANDARD(1~10)
Use ◄ or ► button to adjust the hue of the selected camera. Initial number is 5
(STANDARD).
8
EXIT
Exit from the CAMERA SETUP menu

4. RECORD SETUP

RECORD SETUP
> RECORD MODE
NORMAL RECORD FPS
ALARM RECORD FPS
ALARM RECORD DWELL
RECORD QUALITY
MOTION ENENT MIGRATION
EXIT
Contents:
RECORD MODE
Use ◄ or ► button to select MUX or QUAD recording.
NORMAL RECORD FPS 15P (1~5P/7P/10P/15P/30P)
Use ◄ or ► button to select recording speed.
15P means 15 fields per second, 30P is the highest speed, and 1P is the lowest. There are
a total of nine speeds you can choose from. (FPS: Field per second)
Note: PAL: (1~4P/6P/8P/12P/25P) NTSC=15P, PAL=12P on default.
ALARM RECORD FPS 15P (1~5P/7P/10P/15P/30P)
Use ◄ or ► button to select alarm recording speed when external alarm or motion
Press the MENU button to go into the main menu.
Use the ▲ or ▼ button to select items.
CH1
Press the ◄ or ► button to confirm the selection.
ON
ON
Press MENU to escape to exit the set up mode.
5
STANDARD
STANDARD
STANDARD
CH1(CH1~CH4)
ON(ON/OFF)
ON(ON/OFF)
MUX
15P
15P
5SEC
HIGH
OFF
MUX(MUX/QUAD)
5
Press the MENU button to go into the main
menu.
Use the ▲ or ▼ button to select items.
Press the ◄ or ► button to confirm the
selection.
Press MENU to escape to exit the set up mode.