Copy To Card - Samsung Digimax V800 User Manual

Copy To Card

■ This enables you to copy image files, movie clips and voice recording files to the memory card.
● Copying to the Memory Card
1. Press the play mode button and press the menu button.
2. Select the [Copy to Card] menu tab by pressing the
LEFT/ RIGHT button.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [No] : Cancels "Copy to Card".
- [Yes] : All images, movie clips and voice recording files
saved in the internal memory are copied to the memory card after the
[Processing!] message is displayed. After copying has been completed, the
screen will return to play mode.
INFORMATION
● When this menu is selected without inserting a memory card, you can select the
[Copy to Card] menu but the menu can't be run.
● If there is not enough space available in the memory card to copy saved images in the
internal memory (20MB), the [Copy to Card] command will copy only some of the images
and display [Card Full!] message. Then the system will return to the playback mode.
Please be sure to delete any unnecessary files to free up space before inserting the
memory card into the camera.
● When you move the images that are stored in the internal memory by doing [Copy to
Card] to the card, the next number of file names will be created in the card to avoid
duplication of the file name.
- When the [Reset] of the [File] setup menu was set : The copied file names start from
after the last stored file name.
- When the [Series] of the [File] setup menu was set : The copied file names start from
after the last captured file name. After completing [Copy to Card], the last stored image
of the last copied folder is displayed on the LCD monitor.
《86》
Copy To Card
No
Yes
Exit:MENU Move: