Starting The Recording Mode; How To Use The Auto Mode - Samsung Digimax V800 User Manual

LCD monitor indicator
17 White Balance
18
19
20 Sharpness
21 Image quality
22 Image size
Number of available shots remaining
23
Remaining time (Movie clip/ Voice recording)
24 Optical/ Digital Zoom bar/ Zoom rate

Starting the recording mode

■ How to use the AUTO mode (

1. Insert the batteries (p.15). Insert the batteries taking
note of the polarity (+ / -).
2. Insert the memory card (p.18). As this camera has a
20MB internal memory, you do not need to insert the
memory card. If the memory card is not inserted, an
image will be stored in the internal memory. If the
memory card is inserted, an image will be stored on the
memory card.
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
(If the date/time that is displayed on the LCD monitor is
incorrect, reset the date/ time before taking a picture.)
5. Select the AUTO mode by rotating the mode dial.
6. Point the camera towards the subject and compose the
image by using the LCD monitor.
7. Press the shutter button to capture an image.
INFORMATION
● If the auto focus frame turns to red when you press the shutter button down half way,
it means that the camera cannot focus on the subject. Should this be the case, the
camera is unable to capture an image clearly.
ISO
RGB
)
RGB
12
00:01:30/ 01:00:00
[ AUTO mode ]
p.40
p.40
p.39
p.51
p.48
p.47
p.17
p.17
p.29~30
《21》