Before Contacting A Service Center - Samsung Digimax U-CA User Manual

Before contacting a service center

Please check the following
Symptom
The camera doesn t
switch on
The camera power
ceases whilst in use
Batteries drain quickly
Camera does not
take images when
pressing the Shutter
button
The camera suddenly
stops working while in
use.
86
Causes
- There is low battery capacity
- An AC Power Adapter is not
connected
- Batteries are inserted incorrectly
with the reverse polarities.
- The batteries are exhausted
- The Camera is turned off
automatically.
- The Adapter plug is not
connected securely
- The Camera is being used in
low temperatures
- The memory card is not
inserted
- There is insufficient memory capacity
- The memory card has not been formatted
- The memory card is exhausted
- The camera's power is off
- The batteries are exhausted
- The memory card is locked
- Batteries are inserted
incorrectly with the reverse
polarities.
- The camera was stopped due
to a malfunction.
Remedy
- Insert fresh batteries
- Connect an AC Power Adapter
- Insert the batteries according to the polarity
marks (+, -).
- Insert fresh batteries
- Slide the power switch to reactivate camera
- Remove and re-insert the plug
- Keep the camera in warm conditions
(i.e. inside a coat or jacket) and only remove it
in order to take images
- After turning the camera off, insert a new
memory card
- Delete unnecessary image files
- Format the memory card (p.66)
- Insert a new memory card
- Turn the camera power on
- Insert fresh batteries
- Slide the write protect switch to the bottom of
the memory card
- Insert the batteries according to the polarity
marks (+, -).
- Press the power button for longer than 3
seconds. The camera will restart to its normal
operation state.