Starting Play Mode; Playing Back A Still Image - Samsung Digimax U-CA User Manual

Starting play mode

Turn the camera on and select Play mode by pressing the play mode button (
The camera can now play back the images stored in the memory.
If you have turned on the camera by pressing the POWER button, you can press the PLAY
button once to switch to Play mode and press it again to switch to Recording mode.
If you have turned on the camera by pressing the PLAY button, you can press the PLAY button
again to turn off the camera.
You can set up the PLAY mode function by using the camera buttons and LCD monitor.

Playing back a still image

1. Select the PLAY mode(
play mode button.
2. The last image stored on the memory is
displayed on the LCD monitor.
3. Select an image that you want to play back by
pressing the LEFT / RIGHT button.
Press and hold the LEFT or RIGHT button to
play back the images quickly.
INFORMATION
Manner mode: Pressing the power button for more than 3 seconds changes the buzzer
Even if the camera s power is off, you can start the play mode by pressing the play
mode button.
42
) by pressing the
and start-up sound setting to OFF, even though you may have set these
to ON. To turn on the startup sound and operation sound, set the startup
sound (MyCAM mode) and operation sound (Setup mode) to a setting
other than [OFF].
).