Introduction Package Contents Note Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Without stand Monitor Manuals Quick Setup Guide Cables D-Sub Cable Sold separately DVI Cable...
Page 3
Introduction Sold separately TV Antenna Cable Component(P , Y) Cable USB Cable (Coaxial Cable) Audio cable Digital audio optic output ca- Others Remote Control Batteries (AAA X 2) Cleaning Cloth BN59-00624A (Not available in all loca- tions) Cable holding ring Stand Body Stand Base Note...
Your Monitor Front Activates a highlighted menu item. Push the ' Changing the source is only allowed for external devices connected to the product at the time. To switch Screen modes: [PC] →[Ext.] → [DVI] → [TV] → [Component] → [HDMI1] → [HDMI2] >>...
Page 5
Note The button to the right of the monitor are touch-sensitive buttons. Touch a button lightly with your finger. Power indicator This light is lit when operating normally, and blinks once when your adjustments are saved. Note See PowerSaver described in the manual for further information regarding power saving functions.
Page 6
Introduction Connect the PC terminal at the back of your monitor to your computer. HDMI/PC/DVI-D AUDIO IN / DIGITAL AUDIO OUT (OPTICAL) / EX-LINK Connect the [ HDMI/PC/DVI-D AUDIO IN ] ter- minal at the back of your product to your com- puter’s sound card.
Page 7
Introduction ically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use.
Page 8
COMMON INTERFACE HDMI IN 2 / Note See Connecting Cables for further information regarding cable connections. Cable holding ring • Fix the cables using the holding ring, as shown in the figure. Introduction Connect the CATV cable or TV antenna cable to the "ANT IN"...
Remote Control POWER 2. Number button 3. -/-- Introduction POWER Number Button -/-- TV/DTV CH LIST MUTE MENU Up-Down Left-Right buttons ENTER RETURN SOURCE PRE-CH GUIDE D.MENU EXIT INFO TTX/MIX COLOR BUTTON P.MODE, M/B (MagicBright) S.MODE AUTO P.SIZE DUAL SUBTITLE SOURCE Turns the product On/Off.
Page 10
4. TV/DTV 5. CH LIST MUTE MENU Up-Down Left- Right buttons ENTER RETURN SOURCE 13. PRE-CH 14. GUIDE 15. D.MENU EXIT INFO 19. TTX/MIX 20. COLOR BUTTON 21. P.MODE, M/B (Magic- Bright) Introduction Enter the two-digit channel number. Selects the TV and DTV mode directly. It display "Channel List"...
Page 11
22. S.MODE 23. AUTO - Available In PC mode Only 24. P.SIZE DUAL 26. SUBTITLE 27. SOURCE - Not Available 28. PIP-Not Available Introduction The monitor has three automatic picture settings that are preset at the factory. Then press the button again to circle through available preconfig- ured modes.
Connections Connecting Cables Connecting to a Computer Connect the power cord for your monitor to the POWER port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer. Using the D-sub (Analog) connector on the video card.
• If you connect properly your monitor using the DVI connector but get a blank or fuzzy screen, check to see if the monitor status is set to analogue. Press 'SOURCE [ double-check the input signal source. Connecting to a Macintosh 1.
Note Connect to the DVD Devices input if the device has a EXT (RGB) jack. You can watch DVD simply by hooking up the DVD player with the monitor as long as the power is on. Connect the EXT (RGB) port of the monitor to the DVD Player using a SCART jack. When a Scart device is connected to your monitor, the Source automatically changes to Ext.
Connecting DVD / DTV Set Top Box Note Connect to the DVD / DTV Set Top Box input if the device has a [COMPONENT IN] connector. You can watch Component simply by hooking up the Component with the monitor as long as the power is Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [R-AUDIO-L] port of the monitor.
Input devices such as digital DVD are connected to the HDMI IN terminal of the monitor using the HDMI cable. When all the connections are completed, connect the power cords for the monitor and DVD(or the device connected to the digital output terminal). Select HDMI using the ‘SOURCE [ Connecting Using a DVI to HDMI Cable Connect the DVI output terminal of a digital output device to the [HDMI IN] terminal of the...
Connect the [DIGITAL AUDIO OUT (OPTICAL)] terminal of your monitor to the digital sound input terminal of your digital amplifier using an optical cable. Set the Internal Mute On in the Sound menu using the MENU button. Adjust the sound volume using the Volume button of your amplifier If the connections are set up, power up your monitor and amplifier.
Connecting Headphone Note You may connect your headphones to the monitor. Connect your headphones to the Headphone connection terminal. Using the Stand Monitor Assembly Tilt angle You can adjust the tilt angle within a range of 5° forward to 25° backward for the most comfortable viewing angle.
Troubleshooting Self-Test Feature Check Note • Check the following items yourself before calling for service. Contact the service center for prob- lems that you cannot solve by yourself. • Your monitor provides a self test feature that allows you to check whether your monitor is func- tioning properly.
• Do not use benzene, thinner or other flammable substan- ces, or a wet cloth. • We recommend a Samsung cleansing agent is used to pre- vent damage to the screen. • Never use acetone, benzene or thinner. (They may cause flaws or deformation of the screen sur- face.)
PC Mode It appears the PC does not function normally. Check if the Display Adapter Driver (VGA Driver) is properly installed. (Refer to Installing Driver) The monitor screen flickers. Check if the signal cable between the computer and the monitor is securely connected and tight- ened.(Refer to Connecting the monitor) TV Mode TV screen is blurred or shows noise signals.
Check if the resolution and frequency set for the computer video card falls in the range supported by the monitor. If not, reset them referring to the current Information under the monitor menu and Preset Timing Modes. The image is too light or too dark Adjust the Brightness and Contrast.(Refer to the Brightness, Contrast) Power Indicator blinks green.
Page 23
5. You may see small particles if you look closely at the edge of the bezel sur- rounding the screen. This is part of the product’s design and is not a defect. Q & A How can I change the frequency? The frequency can be changed by reconfiguring the video card.
Page 24
Digital TV broadcasting allows you to easily access various information services in your home creating a more information-oriented home. Can I watch digital TV broadcasting with an analog TV? The analog TV cannot interpret digital signals. Therefore, a digital TV is required to watch digital TV broadcasting.