SIZE & POSITION
MENU
H-Position
V-Position
Image Size
Menu H-Position
Menu V-Position
SETUP&RESET
Using the product
Moves the position of the display area on the screen horizontally.
This function is only available in <Analog> mode.
Moves the position of the display area on the screen vertically.
This function is only available in <Analog> mode.
PC signals
•
<Auto> - The picture is displayed at the aspect ratio of the input signal.
•
<Wide> - The picture is displayed in full screen regardless of the aspect ratio of the input signal.
•
A signal not in the standard mode table is not supported.
•
If the resolution is set to the optimal resolution, the aspect ratio does not change whether
the <Image Size> is set to <Auto> or <Wide>.
AV signals
•
<4 : 3> - Displays pictures at the 4 : 3 aspect ratio.
•
<16 : 9> - Displays pictures at the 16 : 9 aspect ratio.
•
<Screen Fit> - If a 720P, 1080i or 1080P signal is input in HDMI/DVI input mode, the picture is
displayed as is without truncation.
This can only be set when the external input is connected through HDMI/DVI and <PC/AV
Mode> is set to <AV>.
You can adjust the horizontal position of the OSD.
You can adjust the vertical position of the OSD.
DESCRIPTION
3-5