Iso; Anatel; Acma - Siemens RUGGEDCOM RX1501 Installation Manual

Certification
6.1.7 ISO
6.1.7

ISO

This device was designed and manufactured using a certified ISO (International
Organization for Standardization) quality program that adheres to the following
standard:
•
6.1.8

ANATEL

This device meets the requirements of the following standards established by the
Agência Nacional de Telecomunicações (ANATEL) and is certified for use in Brazil:
•
Notices specific to ANATEL:
Note
The RUGGEDCOM RX1501 is not certified for use on 2G, 3G or 4G LTE networks in
Brazil.
Note
This equipment operates on a secondary basis. That is, it is not entitled to protection
against harmful interference, even from the same type of station, and may not cause
interference to systems operating on a primary basis.
Note
This equipment has no right to be protected from harmful interference and may not
cause interference in duly authorized systems.
6.1.9

ACMA

This device meets the requirements of the following Australian Communications and
Media Authority (ACMA) standards under certificate ABN 98 004 347 880:
•
•
•
•
The device is marked with an RCM symbol to indicate compliance when sold in the
Australian region.
44
ISO 9001:2015
Quality management systems – Requirements
Anexo à Resolução Anatel nº 442/2006
Radiocommunications (Compliance Labelling – Devices) Notice 2014 made
under Section 182 of the Radiocommunications Act 1992
Radiocommunications Labelling (Electromagnetic Compatibility) Notice 2008
made under Section 182 of the Radiocommunications Act 1992
Radiocommunications (Compliance Labelling – Electromagnetic Radiation)
Notice 2003 made under Section 182 of the Radiocommunications Act 1992
Telecommunications Labelling (Customer Equipment and Customer Cabling)
Notice 2001 made under Section 407 of the Telecommunication Act 1997
RUGGEDCOM RX1501
Installation Manual, 04/2022, C79000-G8976-1054-22