Peavey PVXp 12 Bluetooth Operating Manual page 35

Loudspeaker System Specifications
Fig. 53 Front LED Selected
The Front LED is mounted on the front baffle behind the grille, and the LED
lights up Blue to show power has been supplied to the speaker system.
Rotating the "Push for DSP" knob will then change that parameter from On to
Off, see Fig. 54
Fig. 54 Front LED turned Off
Turning the "Push for DSP" knob one more notch will chose the Limit function of
the Front LED. See Fig. 55
Fig. 55 Front LED parameter set to Limit
Push in the "Push for DSP" knob to select the Limit parameter for the Front LED,
and to exit the Config Menu Selection screen, rotate the "Push for DSP" knob till
the arrow in the upper right hand corner turns blue, then press the "Push for
DSP" knob again to return to the Main Menu screen.
About the Limit Function of the PVX™p 12 Bluetooth® Speaker System
Choosing the Limit parameter allows the Front LED mounted on the baffle
behind the grille to flash RED when the sophisticated DSP based compression
and limiting system engages.
34