Table of Contents
Advertisement
Loudspeaker System Specifications
arc suppression capacitor to help during turn-off, and tends to make a clean
disconnect from the AC power, while the power cord IEC connector can make
intermittent contact before finally becoming fully disconnected, e.g., as when
wiggling the cord.
DSP Menu
The DSP menu is accessed via the Push for DSP knob (9), and is displayed on
the LCD Screen for DSP Menu (10).
In this section, we will step through the DSP menu as it is displayed and as each
layer is accessed.
When the unit is first turned on, it displays the Peavey® logo, and then a yellow
bar across the bottom showing the progress of the loading into working memory
of the DSP code, and the model is displayed above the progress bar until it is
finished loading. Then you see the Main Start Screen.
Fig. 1 Main Start Screen
MAIN (MASTER) LEVEL ADJUST
If you turn the "Push for DSP" knob (9) CCW one notch, then the volume knob
will become highlighted, if you push in the "Push for DSP" knob in, then the "dB"
level indicator highlights, and turning the "Push for DSP" knob will change the
Master Gain level, see figure below.
Fig. 2 Main (Master) Channel Gain (Default)
Here is an example of the gain being changed to +3 dB
15
Advertisement
Table of Contents
