Unpacking
Front
Rear
1. Power indicator
2. Power button
Change input source : Keep the Power button pressed for two seconds and then release the button to
convert the input signal source into analog or digital format.
Auto adjustment : Keeping the Power button pressed for three seconds will activate the Auto
Adjust feature with a "beep."
Note : See
functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods.
This light glows green during normal operation, and blinks blue once as the
monitor saves your adjustments.
Use this button to turn the monitor on and off.
Use this button to Auto adjustment feature.
Use this button to change input source.
PowerSaver
described in the manual for further information regarding power saving
English > Main > Introduction > front