Live Tv; Turning The Tv On For The First Time; Channel Scan - Toshiba 43C350KN Owner's Manual

Turning the TV on for the First Time

1. Connect the mains cable to the mains socket after you have
completed all the connections.
2. The first time you turn the TV on, it will go straight into the
Installation Guide.
3. Press the
/ /
change the settings. Press the
Select your Language
Select your desired language to be displayed on the menu.
Press menu button to set up your TV for store mode.
Connect to the Internet
If your TV does not automatically detect an Ethernet connection, then
use a wireless network, select your network from the list that displays,
also you can add a hidden network.
Select your Country
Select the Country where you will operate the TV.
Terms & Conditions, Privacy Policy
Your use of this device is subject to the End User License Agreement,
and lack of your acceptance of the End User License Agreement
will turn off all smart features of this device. Please read the details
carefully before you choose.
Enhanced Viewing
Enhanced viewing can automatically adjust the picture mode and sound
mode so as to match with the current content displayed on this device in
case it is recognised by the automatic content recognition service.
Sign in your VIDAA Account
Link your TV with VIDAA account.
Name Your TV
Give your TV a name.
Select your Voice Assistant
Select your voice assistant you want to use on the TV.
NOTE
• The Guide above is for referencing purpose and may differ depending
on models/countries/regions.

Channel Scan

You can scan for channels automatically or manually.
NOTE
・
Satellite/antenna/cable function may not be applicable in some
models/countries/regions.
Auto Scan
Automatically scan for channels to view programmes from TV source.
> TV
INPUT
Alternatively, in Live TV, > Settings > Channel > Auto Scan .
If no TV channels were saved before, you will be prompted to do a
channel search.
Satellite
• Single satellite: You can use single satellite if you only have one
satellite equipped.
/ button to navigate the menu and
button to confirm.

Live TV

• DiSEqC: You can choose DiSEqC if you have DiSEqC equipment.
Up to four satellites in DiSEqC 1.0 mode can be installed.
If you are using a motorised antenna, you can use DiSEqC 1.2 mode.
• Unicable: If your house is equipped with Unicable satellite
distribution, you should use this option.
Please make sure that you know the Unicable band and frequency
that can be used. The information should be available on the
equipment or the landlord can provide it.
Antenna
• Channel: Select from All Channels or Free Channels. This option
may not be available depending on countries/regions/operators.
• Scan Mode: Select from digital channels only (DTV), digital and
analogue channels (DTV+ATV) or analogue channels only (ATV).
If you receive DVB-T or DVB-T2 signal, you can use DTV.
• LCN: Switch on/off LCN (Logical Channel Number).
Please note that some operators are restricted to manually change
the channel order. If you switch off LCN, then the channel list can be
edited after channel scan.
This function may not be applicable in some models/countries/regions.
Cable
• Channel: Select from All Channels or Free Channels. This option
may not be available depending on countries/regions/operators.
• Scan Mode: Select from digital channels only (DTV), digital and
analogue channels (DTV+ATV) or analogue channels only (ATV).
• LCN: Switch on/off LCN (Logical Channel Number).
Please note that some operators are restricted to manually change
the channel order. If you switch off LCN, then the channel list can be
edited after channel scan.
This function may not be applicable in some models/countries/regions.
Manual Scan
Manually scan for channels to view programmes from your TV sources
through DTV or ATV.
In Live TV, > Settings > Channel > Advanced Settings > Manual Scan
DTV Manual Scan
Manually scan for DTV channels to view programmes from a TV source.
When the DTV Manual Scan screen appears, press
select Antenna, Cable or Satellite, and select Start to commence the
search of that channel. When the signal has been tuned, signal strength
will be displayed on the screen.
ATV Manual Scan
Manually scan for ATV channels to view programmes from a TV source.
• Frequency: Input the channel frequency you want.
• Picture System: Select the Colour System.
• Sound System: Select the Sound System.
Live TV tutorial
After channel scanning is done for the first time, the screen will display
Live TV operating tutorial, including:
:
/
Load the info bar
:
Load the channel list
/
:
Open the electronic programme guide (only available in some
models/countries/regions)
:
Load on-screen menu
:
Call up search function
:
Jump to the previous channel
13
/ button to