Table of Contents
Advertisement
Phone settings
SIM lock
(Menu 5.5.6)
When the SIM lock feature is enabled, your phone
only works with the current SIM. You must enter
the SIM lock code.
Once you have entered the lock code, you are
asked to confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock
code.
FDN mode
(Menu 5.5.7)
The FDN (Fixed dial number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
The following options are available:
Disable: you can call any number.
Enable: you can only call phone numbers stored in
Phonebook. You must enter your PIN2.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu is not displayed.
To change your PIN2, refer to the Change PIN2
menu (Menu 5.5.8).
Change PIN2
(Menu 5.5.8)
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu is not displayed.
120
Extra settings
(Menu 5.6)
You can turn the automatic redialling or answering
features on or off.
To turn a feature
Press the
on
On soft key or
A check mark displays next
to the option.
off
Off soft key or
The check mark no longer
displays.
The following options are available:
Auto redial: when this option is checked, the
phone makes up to ten attempts to redial a phone
number after an unsuccessful call.
Note: The interval between two call attempts varies.
Anykey answer: when this option is checked, you
can answer an incoming call by pressing any key,
except the
key and the Reject soft key. To
reject the call, press the
key or the Reject soft
key.
When this option is unchecked, you can only press
the
key or Accept soft key.
Phone settings
key.
key.
121
Advertisement
Table of Contents
