Table of Contents
Advertisement
Menu functions
Account settings: configure e-mail accounts
using different e-mail servers. Set the options for
each account:
- Account name: enter a name for the currently
selected account.
- User name: enter a user name.
- Email address: enter your e-mail address.
- SMTP server: enter the IP address or host name
of the outgoing e-mail server.
- SMTP port: enter the SMTP port number.
- Connect to POP3(IMAP4) server first:
connect to the POP3 or IMAP4 server before
connecting to the SMTP server to send e-mails.
- Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
When the protocol type is POP3:
- POP3 server: enter the IP address or host name
of the server that receives your e-mail.
- POP3 port: enter the POP3 port number.
- User ID: enter the POP3 user name.
64
- Password: enter the POP3 password.
- Use SMTP authentication: enable SMTP
authentication, which requires the user to login
before sending e-mails.
- Same as POP3: select if you want the SMTP
server to have the same parameters as the POP3
server.
- SMTP user ID: enter the SMTP user name.
- SMTP password: enter the SMTP password.
- APOP login: connect to the server by using the
APOP login scheme.
- Secure connection: use a secure connection for
the e-mail service.
When the protocol type is IMAP4:
- IMAP4 server: enter the IP address or host
name of the server that receives your e-mail.
- IMAP4 port: enter the IMAP4 port number.
- User ID: enter the IMAP4 user name.
- Password: enter the IMAP4 password.
Advertisement
Table of Contents
