Error Messages - Samsung ST80 User Manual

Error messages

When the following error messages appear, try these remedies.
Error message Suggested remedies
Card Error
The inserted memory card is not
available with your camera. Insert a
Card not supported.
microSD
card.
Connection failed.
File names do not match the DCF
standard. Transfer the files on the
DCF Full Error
memory card to your computer and
format the card. (p. 109)
Device disconnected. Connect to a device again.
Delete the damaged file or contact a
File Error
service center.
Initialization failed.
Turn off your camera and then turn
it on again.
Remove your memory card and insert
it again.
Format your memory card.
TM or microSDHC TM memory
The camera cannot connect to the
network using the selected access
point. Select another and try again.
The camera fails to connect to the
other camera. Try connecting again.
Turn on allshare enabled devices on
the network.
The camera fails to locate an allshare-
enabled device.
Error message
Invalid password.
Low Battery
Memory Full
No Image File
Photo reception failed.
Transfer failed.
113
Appendixes
Suggested remedies
The password for transferring files to
another camera is wrong. Enter the
correct password again.
Insert a charged battery or recharge the
battery.
Delete unnecessary files or insert a new
memory card.
Take photos or insert a memory card
that has some photos.
The camera fails to receive a photo
from the sending camera. Ask the other
person to send the file again.
The camera fails to send a photo.
Try sending again.
The camera fails emailing or sending
to an allshare-enabled device. Ensure
the network is available and try
connecting agian.