Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Navkom BBX MINI
Summary of Contents for Navkom BBX MINI
- Page 1 BBX MINI CONTROL UNIT INSTRUCTION MANUAL...
-
Page 2: Table Of Contents
For most users, this is approximately in the middle of the finger pad, where READER CONTROL MODES the fingerprint curves form the centre. Have a look at your fingerprints and BBX MINI CONTROL UNIT their features. READER CONTROL MODES (BBX control unit) DRY SKIN IS THE MOST COMMON CAUSE OF POOR READING. -
Page 3: Technical Data
READER COMPONENTS AND FUNCTIONS BEFORE THE FIRST USE OF YOUR FINGERPRINT READER, IT IS RECOMMENDED TO RESET TO FACTORY SETTINGS (Test Function remains on for 1 minute – see p. 5 for more info). ONCE THE FINGERPRINT READER IS RESET, IT IS RECOMMENDED TO IMMEDIATELY ENTER THE ADMINISTRATOR’S FINGERPRINTS. -
Page 4: Reader Control Modes
READER CONTROL MODES BBX MINI CONTROL UNIT No matter which control unit you have, when using the reader for the first time, you can choose between three different control modes: analogue, app or hybrid control. Description and instructions for each control mode can The control unit is built into the door leaf. -
Page 5: Reader Control Modes (Bbx Control Unit)
ANALOGUE CONTROL BY PLACING YOUR FINGER ON THE READER CONTROL MODES (BBX control unit) SENSOR When using the reader for the first time, you can choose between three different control modes: analogue, app or hybrid control. To choose the control mode, simply start using the reader in the manner in your preferred mode. -
Page 6: Factory Reset
USER FINGERPRINTS ENTRY PROCEDURE TO START ENTERING USER FINGERPRINTS, PLACE THE ADMINISTRATOR IN THIS CONTROL MODE, INDIVIDUAL FINGERPRINTS CANNOT BE DELETED. YOU CAN FINGER ON THE SENSOR FOR 5 SECONDS. ONLY DELETE THE ENTIRE FINGERPRINT DATABASE (INCLUDING ADMINISTRATORS) BY RETURNING THE DEVICE TO FACTORY SETTINGS. The blue and green LEDs flash alternately. -
Page 7: Hybrid Control
APP FUNCTIONS HYBRID CONTROL Once the fingerprints are entered, you can connect to the reader and control both relays and LED settings Perform the factory reset. in the app. Add your reader in the X-Manager app. Start by entering administrator fingerprints on the reader/by pressing Button A on the remote control. Pressing the Touch to open - relay 1 tab will Once the administrator’s fingerprints are entered, you can use the app only to unlock the door or manage unlock the door. -
Page 8: App Control
APP CONTROL Download the X-manager app to your smartphone or tablet from the Google Play Store (Android) or the App Store (Apple). Perform the factory reset. Find, name and add your reader in the X-Manager app. X-manager Click on the name to establish a connection. Start entering administrator fingerprints in the app. - Page 9 A N D R O I D CONNECTING THE PHONE TO THE READER CONNECTING AN ADDITIONAL PHONE TO THE READER Every new reader needs to be added in the X-manager app A single reader can be managed with more than one phone. before it can be used.
- Page 10 A P P L E A P P L E CONNECTING THE PHONE TO THE READER CONNECTING AN ADDITIONAL PHONE TO THE READER Every new reader needs to be added in the X-manager app A single reader can be managed with more than one phone. before it can be used.
- Page 11 ADDING PEOPLE PRESS THE GREEN TAB TO START ADDING PEOPLE. Enter the person’s name. Choose either administrator or user rights. An administrator can perform all functions including deleting other users and administrators. A user can only open the door. 3 fingerprints for the person must be entered. Place the person’s finger on the sensor 3 times in a row.
- Page 12 LIST OF ENTERED PEOPLE The settings cannot be changed after the person has been entered. You need to delete the person and add them again with different settings. Administrators are indicated in orange and users in light brown. Certain data is displayed under the name of each person: 0 level of rights (User/Administrator) 0 number of entered fingerprints You can enter additional fingerprints for any person at any time.
- Page 13 SETTINGS All security functions can be performed only with the confirmation of the administrator’s fingerprint. Device name Free entrance mode: enabling this mode allows the door to be opened by any fingerprint, even if it is not stored in the database. The period during which free entrance mode is switched on can be adjusted (1 to 1440 minutes), after which it is automatically turned off.
- Page 14 LED SETTINGS If there is LED lighting in the door, it can be connected to the system and controlled by the X-manager. It is possible to adjust the brightness (1% to 100%) and the schedule for turning the lighting on/off. 24H: The LED lighting will be switched on continuously.
- Page 15 UNLOCK THE DOOR WITH THE APP The user or administrator can unlock the door by clicking on the “Touch to open” tab. Pressing the “Touch to open” tab will unlock the door. HISTORY REVIEW OF THE LAST 100 EVENTS. The following events are monitored: 0 all successful entries (users and administrators) 0 all attempts to enter outside the scheduled time (the schedule must be turned on and assigned to a user)
- Page 16 SCHEDULES SCHEDULES CAN BE ASSIGNED TO USERS TO LIMIT THEIR ENTRANCE TIME. Click on the Add tab to start assigning a schedule. Write the name of the schedule. There are three options to limit access for individual days of the week: 0 unlimited 24h access 0 no access 0 limited access (from –...
- Page 17 ADDING A REMOTE CONTROL IN THE APP If you have a remote control, you can add (pair) it in the app. Pressing the “System” tab opens a list of all paired devices. You can add new remote controls by pressing the ADD REMOTE CONTROL button. The reader beeps for 30 seconds.