Table of Contents
Advertisement
Deleting a Sampled Sound
You can use the following procedure to specify a sampled
tone number and delete its data.
1.
ck
Press
(FUNCTION) and then use the
(10-key) [4] (U) and [6] (I) keys to display
"DELETE" (page E-7).
Flashes
D E L E T E
2.
br
Press the
(10-key) [9] (ENTER) key.
S 1 : O r
Used memory
(Unit: Kbytes)
br
3.
Use the
(10-key) [–] and [+] keys to select
the tone number of the data you want to delete.
4.
br
Press the
(10-key) [9] (ENTER) key.
This displays a delete confirmation message.
S u r e ?
5.
br
Press the
(10-key) [+] (YES) key to delete the
data, or [–] (NO) or [7] (EXIT) to cancel the
delete operation.
• After the delete procedure is complete, "Complete" will
appear on the display followed by the screen in step 1
of the above procedure.
• For information about deleting individual drum sounds
in a drum sampling set, see "Editing Sampled Drum Set
Sounds" on page E-23.
Sampling Sounds and Playing Them on the Digital Piano
Protecting Against Accidental Deletion of
Sampled Sounds
You can use the following procedure to protect each sampled
sound against accidental deletion.
br
1.
2.
3.
4.
n l
g
Remaining
5.
memory capacity
■ Saving Sample Data on an External Device
• Memory card (page E-60)
• Computer (page E-67)
bp
Press
(TONE) and then use
enter the tone number of the sampled tone you
want to protect.
ck
Press
(FUNCTION) and then use the
(10-key) [4] (U) and [6] (I) keys to display
"SAMPLING" (page E-7).
br
Press the
(10-key) [9] (ENTER) key.
br
Use the
(10-key) [4] (U) and [6] (I) keys to
display "Protect".
P r o t e c t
br
Press the
(10-key) [+] key to turn on
protection.
Once protected a tone cannot be deleted.
A protected tone is indicated as shown below.
* 1 : O r
Protected
br
(10-key) to
br
n l
g
E-25
Hide quick links:
Advertisement
Table of Contents
