Adding Breadth To The Sound-Chorus Effect - Roland HP 237R Owner's Manual

Adding Breadth to the Sound–Chorus Effect
The HP 237R allows you to add chorus to what you play on the keyboard.
By adding the Chorus Effect, you can give the sound greater dimension, with more
fatness and breadth.
The settings of the Chorus Effect are memorized independently for each sound.
When the power is turned on, the Chorus Effect will be applied to the "Electric Piano 1",
"Electric Piano 2" and "Vibraphone" sounds. The Chorus Effect will be turned off for the
other sounds.
fig.5-06
Volume
Reverb
Min Max
1.
Press the [Chorus] button to turn on the indicator.
The Chorus Effect will be applied to the currently selected sound.
fig.5-07.e
When you select a sound for which the Chorus Effect has not been turned on, the
[Chorus] button indicator will go dark.
2.
To cancel the Chorus Effect, press the [Chorus] button once again
to make the indicator go dark.
fig.5-08.e
Electric Electric Harpsi-
Chorus Piano 1 Piano 2 Piano 1 Piano 2 chord
Tone
Chorus
Press
Chorus
Press
While using the Dual (p. 16) or Split (p. 17) functions, lighting/extinguishing the
[Chorus] button's indicator will switch the Chorus Effect on/off for both sounds.
(However, when Split is being used, the Chorus Effect will not be applied to the
Acoustic Bass.)
After Dual or Split is cancelled, the piano reverts to the Chorus Effect setting that
a particular sound normally carries.
The on/off status of the [Chorus] button is not remembered when Dual or Split are
used.
The amount of Chorus can be changed. Please refer to "Changing the Depth of the
Chorus" (p. 27).
Vibra- Pipe Tempo
phone Organ Strings
40 60 80 96 120 168 208
Lit
Dark
Playing the Keyboard
Beat
Sound On / Off
0 2 3 4 6
Metronome
Chorus
Chorus
Play Rec Demo Song
19