How To Use The Slide Show Dialog Box; Renaming An Image In Thumbnail View; How To Rename An Image - Ricoh Caplio RX Operation Manual

How to Use the Slide Show Dialog
Box
You can make slide show display settings in
the [slide show] dialog box.
1. [Operating method]
Select either Auto slide show (the slides
are played automatically, in order) or Man-
ual (switch frames by clicking the mouse
button or pressing the [Enter] key).
2. [Display interval]
Specify how long in seconds to display
each image, when using Auto slide show.
3. [Background color]
Choose a background color for your
images. Click the [Choose Color] button
and choose a color from the dialog box
that appears.
4. [Display file name]
If you check this box, the file name will
appear in the bottom of the image.
5. [Maximum display]
If you check this box, your images will be
displayed at full-screen size.
6. [Playback sound]
If you check this box, and the images
have associated sounds, the sounds will
also be played back.
7. [Repeat]
If you check this box, the sets of images
will be shown repeatedly, until you press
the [Esc] key to stop. If you uncheck this
box, the images in the folder will be dis-
played through the cycle once, then the
slide show will finish.
Renaming an Image in
Thumbnail View
You can rename an image shown on the
Thumbnail Display screen.

How to Rename an Image

To rename an image shown on the Thumb-
nail Display screen, follow the steps below.
1.
Select an image you want to
rename.
2.
On the image you selected, right
click and choose [Rename] from
the menu.
3.
When the [Rename] dialog box
appears, enter the new name for
the image.
4.
Click [OK].
137
3