Connecting The Camera To A Computer; For Windows Xp - Ricoh Caplio RX Operation Manual

Connecting the Camera
to a Computer
After installing the software on your com-
puter, connect your camera to it.
1.
Make sure the camera's power is
off.
2
2.
Connect the USB cable to the
USB port of your computer.
3.
Connect the USB cable to the
USB terminal of your camera.
Your camera turns on.

For Windows XP

In Windows XP, the first time you connect
your camera to the computer using a USB
cable, the [Found New Hardware Wizard]
screen will appear.
1.
Select [Install from a list or spe-
cific location (Advanced)].
2.
Select [Next].
3.
Select [Search for the best
driver in these locations.] -
[Include this location in the
search] and then press the
[Browse] button.
4.
Browse to the folder where the
WIA driver was installed (by
default this should be C:\Pro-
gram Files\CaplioSoftware\WIA
driver) and then select [Next].
The WIA Driver is installed.
The[Caplio RX] screen appears.
124