Setting The White Balance Manually (Manual Settings) - Ricoh Caplio R6 User Manual

Setting the White Balance Manually
(MANUAL SETTINGS)
1
Switch the mode selector to 5.
2
Press the ADJ. button and then press the #$ buttons
until the white balance menu appears.
3
Press the !" buttons to select
[M].
4
Point the camera at a piece of
paper or something white
under the lighting conditions
for your picture.
5
Press the DISP. button.
• The white balance is set.
6
Press the MENU/OK button.
• The symbol appears on the screen.
• The screen is displayed with the white
balance set in Step 5. If the result is
not as expected, repeat Steps 4 and 5
to change the settings as many times
as required.
Note ----------------------------------------------------------------------------------------------
To cancel [MANUAL SETTINGS], select a setting other than [M] in Step 3.
1
89