Changing Image Confirmation Time (Lcd Confirm.) - Ricoh CAPLIO Caplio R30 User Manual

Changing Image Confirmation Time
(LCD CONFIRM.)
Immediately after pressing the shutter button, the still image taken is
displayed for a moment so you can check it.
At purchase, Confirmation Time is set to 0.5 seconds, but this can
be changed.
Possible Settings
OFF (Photo not displayed for confirmation)
0.5 Seconds *Setting upon purchase
1 Second
2 Seconds
3 Seconds
To change Confirmation Time, follow the steps below.
1.
Display the setup menu.
For detailed operation, see P.111.
2.
Press the " button to select [LCD
CONFIRM.] and press the $
button.
3.
Press the !" buttons to select
the desired setting.
4.
Press the M/O or # button.
5.
If you pressed the # button in step
4, press also the M/O button.
This setting will be used until you change it.
Caution
When [LCD CONFIRM.] is set to 0.5 seconds, symbols such as the zoom bar may remain on
the monitor while the image is displayed.
119