Connecting To Other Equipment; Connecting To A Television - Casio QV-3000EX/Ir User Manual

CONNECTING TO OTHER EQUIPMENT

Connecting to a Television

Images being displayed on the camera's monitor screen,
whether for recording or playback can also be displayed on
the screen of a connected television.
Accessory
video cable
TV
INPUT
L R
VIDEO
AUDIO
VIDEO IN terminal
1.
Connect one end of the video cable to the cam-
era and the other end to the television.
2.
Set up the television for video input.
• See the documentation that comes with the television
for information about how to do this.
3.
The connection procedure is the same for both
recording and playback.
CONNECTING TO OTHER EQUIPMENT CONNECTING TO OTHER EQUIPMENT
IMPORTANT!
Selecting the Video Output Signal Mode
You can select either of two common video output modes:
NTSC or PAL.
The video system you should use depends on the country
where you plan to use the output signal. In the United States
or Japan, for example, you should use NTSC, but in Europe
you need to use PAL.
Check with your local video or TV retailer if you are unsure
VIDEO OUT
terminal about which video mode you should use in your country.
IMPORTANT!
1.
2.
3.
E-99
• A television must have a video input terminal like the
one shown in the illustration to connect to this camera.
• Battery capacity (page E-30) and other displays that
normally appear on the camera's monitor screen are
also displayed on the television screen.
Selecting PAL causes the monitor screen to go blank
during video output.
Press MENU.
Select "Set Up" "Video Out".
Select the video mode you want to use.