1. Manuals
  2. Brands
  3. RHINO Manuals
  4. Lawn Mower
  5. FN120
  6. Operator's manual

RHINO FN120 Operator's Manual

Flex-wing mechanical level lift rotary mower
Hide thumbs Also See for FN120:
Table of Contents

Advertisement

Quick Links

Download this manual
Published 01/11
This Operator's Manual is an integral part of the safe operation of this machine and must
be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety
and Operation Instructions contained in this manual before operating the equipment. C01-
Cover
®
RHINO
1020 S. Sangamon Ave.
Gibson City, IL 60936
800-446-5158
Email: parts@servis-rhino.com
OPERATOR'S MANUAL
©2011 Alamo Group Inc.
FN180/
FN120
FLEX-WING MECHANICAL LEVEL
LIFT ROTARY MOWER
Part NO. 00787290C
$0.00

Advertisement

Chapters

Table of Contents
loading

Related Manuals for RHINO FN120

Summary of Contents for RHINO FN120

  • Page 1 Operation Instructions contained in this manual before operating the equipment. C01- Cover ® RHINO 1020 S. Sangamon Ave. Gibson City, IL 60936 800-446-5158 Email: parts@servis-rhino.com FLEX-WING MECHANICAL LEVEL ©2011 Alamo Group Inc. FN120 LIFT ROTARY MOWER Part NO. 00787290C $0.00...
  • Page 2 This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the implement at all times. A Manual canister is provided on the implement where this manual can be properly stored. If you lose or damage this manual a free replacement manual can be obtained from an authorized Rhino dealer or by down loading the manual from the Rhino website www.servis-rhino.com BEFORE YOU START!! READ, UNDERSTAND, and FOLLOW the information provided in this manual, the AEM Mower Safety manual and the tractor operator's manual carefully to learn how to operate and service your machine...
  • Page 3 IIn order to reduce accidents and enhance the safe operation of mowers, Alamo Group Ag Division, in cooperation with other industry manufacturers has developed the AEM/FEMA Industrial and Agricultural Mower Safety Practices video and guide book. The video will familiarize and instruct mower-tractor operators in safe practices when using industrial and agricultural mowing equipment.
  • Page 4 Alamo Group Ag. Division will provide one (1) AEM Mower Safety Practices Video Please Send Me: VHS Format – AEM/FEMA Mower Operator Safety Video DVD Format – AEM/FEMA Mower Operator Safety Video Mower Operator’s Manual AEM Mower Operator’s Safety Manual Requester Name Requester Address: City...
  • Page 5 DEALER to CUSTOMER Pre-Delivery/ Operation Instructions Dealer should inform the Purchaser of this product of Warranty terms, provisions, and procedures that are applicable. Dealer should inform Purchaser to review the contents of the Operator’s Manual including safety equipment, safe operation and maintenance, to review the Safety Signs on the implement (and tractor if possible) and of Purchaser’s responsibility to train his/her operators’s of safe operation procedures.

  • Page 6: Table Of Contents

    Table of Contents SAFETY SECTION ... 1-1 General Safety Instructions and Practices ... 1-2 OPERATOR SAFETY ... 1-3 CRUSHING HAZARDS... 1-4 CONNECTING OR DISCONNECTING IMPLEMENT SAFETY ... 1-5 THROWN OBJECTS HAZARDS ... 1-6 THROWN OBJECTS HAZARD (CONTINUED)... 1-7 RUN OVER HAZARDS ... 1-8 PTO ENTANGLEMENT HAZARDS ...
  • Page 7 Connecting Mower Hydraulic Lines to the Tractor ... 4-10 SETTING THE MOWER ... 4-11 Setting Deck Height ... 4-12 Setting Deck Pitch... 4-13 DRIVELINE ATTACHMENT ... 4-13 Driveline Length Check ... 4-14 Constant Velocity (CV) Driveline... 4-16 PRE-OPERATION INSPECTION AND SERVICE ... 4-17 Tractor Pre-Operation Inspection/Service...

  • Page 9: Safety Section

    SAFETY SECTION Safety Section 1-1 © 2011 Alamo Group Inc.

  • Page 10: General Safety Instructions And Practices

    NOTE: If you want a translation of this safety section in one of the following Languages, please contact: Translations at 1502 E. Walnut Street Seguin, TX 78155; Fax: (830) 372-9529; Safety Section Translations are available in Spanish, Portuguese, French, German, Russian. FN180/FN120 01/11 © 2011 Alamo Group Inc. SAFETY...

  • Page 11: Operator Safety

    DO NOT EXCEED IMPLEMENT RATED PTO SPEED • AVOID exceeding rated PTO speeds that may result in broken drivelines or blade failures. SAFETY SIGNS: • REPLACE missing, damaged or unreadable safety signs immediately. FN180/FN120 01/11 © 2011 Alamo Group Inc. SAFETY PN OS01 Safety Section 1-3...

  • Page 12: Crushing Hazards

    ATTACH hoses to tractor. • FILL Wing Cylinders with oil. (Refer to Instructions in Operation Section) • KEEP bystanders away before operating wings. • LOWER WINGS slowly and carefully. FN180/FN120 01/11 © 2011 Alamo Group Inc. SAFETY PN CH01 Safety Section 1-4...

  • Page 13: Connecting Or Disconnecting Implement Safety

    KEEP bystanders clear of area before operating wings. • LOWER WINGS slowly and carefully. DO NOT connect the Mower to a tractor with the PTO directly connected to the Tractor transmission. FN180/FN120 01/11 © 2011 Alamo Group Inc. SAFETY (Refer to Instructions in Operation Section)

  • Page 14: Thrown Objects Hazards

    3. INSPECT AREA thoroughly before mowing to REMOVE potential THROWN OBJECT HAZARDS, 4. NEVER ALLOW BLADES to CONTACT SOLID OBJECTS like wire, rocks, post, curbs, guardrails, or ground while mowing. PN TO01 FN180/FN120 01/11 © 2011 Alamo Group Inc. SAFETY Safety Section 1-6...

  • Page 15: Thrown Objects Hazard (Continued)

    STOP mowing when EXCESSIVE VIBRATION occurs: 1. STOP PTO and tractor ENGINE. 2. INSPECT mower for vibration source. 3. REPLACE any damage parts and bent or damaged BLADES. FN180/FN120 01/11 © 2011 Alamo Group Inc. SAFETY PN TO01-X Safety Section 1-7...

  • Page 16: Run Over Hazards

    ONLY mount or dismount when tractor and moving parts are stopped. • STOP ENGINE AND PTO, engage parking brake, lower implement, allow all moving parts to stop and remove key before dismounting from tractor. FN180/FN120 01/11 © 2011 Alamo Group Inc. SAFETY PN RO01...

  • Page 17: Pto Entanglement Hazards

    DO NOT USE PTO ADAPTER. Using a PTO adapter can cause excessive vibration, thrown objects, blade and implement failures by doubling operating speed. Increased working length exposing unshielded driveline areas. FN180/FN120 01/11 © 2011 Alamo Group Inc. SAFETY Safety Section 1-9...

  • Page 18: Mower Blade Contact Hazards

    STOP rotating BLADES disengage PTO and wait for blade to stop rotating before raising mower deck or wings • STOP LOOK and LISTEN before approaching the mower to make sure all rotating motion has stopped. FN180/FN120 01/11 © 2011 Alamo Group Inc. SAFETY...

  • Page 19: High Pressure Oil Leak Hazard

    KEEP hands and body AWAY from pin holes and nozzles ejecting hydraulic fluid. • Hydraulic fluid may cause gangrene if not surgically removed immediately by a doctor familiar with this form of injury. PN HP01 FN180/FN120 01/11 © 2011 Alamo Group Inc. SAFETY Safety Section 1-11...

  • Page 20: Electrical & Fire Hazards

    ADJUST SLIP CLUTCHES to avoid excessive slippage and clutch plate heating. • CLEAR any grass clippings or debris buildup around mower drivelines, slip clutches, and gearboxes. • SHUT OFF ENGINE while refueling. FN180/FN120 01/11 © 2011 Alamo Group Inc. SAFETY PN EF01 Safety Section 1-12...

  • Page 21: Transporting Hazards

    TURN ON tractor FLASHING WARNING LIGHTS. • ALLOW clearance for implement swing while turning. KEEP all raised wings at 10 feet or greater distance from all power lines and overhead obstructions. FN180/FN120 01/11 © 2011 Alamo Group Inc. SAFETY Safety Section 1-13...

  • Page 22: Hazards With Maintenance Of Implement

    California to cause cancer, birth defects or other reproductive harm. • Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. FN180/FN120 01/11 © 2011 Alamo Group Inc. SAFETY CONDITION...

  • Page 23: Parts Information

    Non-genuine "will fit" parts do not consistently meet these specifications. The use of “will fit” parts may reduce mower performance, void warranties, and present a safety hazard. Use genuine Rhino mower parts for economy and safety. (SPRM-1) SEE YOUR RHINO DEALER FN180/FN120 01/11 Safety Section 1-15 © 2011 Alamo Group Inc.

  • Page 24: Decal Location

    (Some shipping and handling charges may apply). Contact your Rhino dealer to order replacement decals FN180/FN120 01/11 Safety Section 1-16 © 2011 Alamo Group Inc.
  • Page 25 6 Yr. Gearbox Warranty INSTRUCT 2 Yr. Driveline Warranty NAME Rhino 3” x 12” LOGO Rhino FN180 6.5” x 18” LOGO NAME Rhino FN120 6.5” x 18” REFLECT REFLECT Red Reflector REFLECT Amber Reflector Canister, Operator’s Manual Operator’s Manual Bolt...

  • Page 26: Decal Description

    SAFETY Decal Description FN180/FN120 01/11 Safety Section 1-18 © 2011 Alamo Group Inc.
  • Page 27 SAFETY FN180/FN120 01/11 Safety Section 1-19 © 2011 Alamo Group Inc.
  • Page 28 SAFETY FN180/FN120 01/11 Safety Section 1-20 © 2011 Alamo Group Inc.
  • Page 29 SAFETY FN180/FN120 01/11 Safety Section 1-21 © 2011 Alamo Group Inc.
  • Page 30 SAFETY FN180/FN120 01/11 Safety Section 1-22 © 2011 Alamo Group Inc.
  • Page 31 SAFETY FN180/FN120 01/11 Safety Section 1-23 © 2011 Alamo Group Inc.
  • Page 32 SAFETY FN180/FN120 01/11 Safety Section 1-24 © 2011 Alamo Group Inc.
  • Page 33 SAFETY FN180/FN120 01/11 Safety Section 1-25 © 2011 Alamo Group Inc.

  • Page 34: Federal Laws And Regulations

    Some regulations specify that no one under the age of 16 may operate power machinery. It is your responsibility to know what these regulations are in your own area or situation. (Refer to U.S. Dept. of Labor, Employment Standard Administration, Wage & Home Division, Child Labor Bulletin #102.) FN180/FN120 01/11 © 2011 Alamo Group Inc. SAFETY...
  • Page 36 We wish to acknowledge the contributions of the members of AEM’s Industrial/Agricultural Mower Manufacturers Council Copyright, 2010, by the Association of Equipment Manufacturers. All rights reserved. This work may not be reproduced or disseminated in whole or in part by any means This safety manual is intended to point out some of the basic safety situations that may be encountered during the normal operation and maintenance of your machine...

  • Page 37: Safety Alerts

    Symbol This Safety Alert Symbol means: “ATTENTION! STAY ALERT! YOUR SAFETY IS INVOLVED!” The Safety Alert Symbol identifi es important safety messages on equipment, safety signs, in manuals or elsewhere. When you see this symbol, be alert to the possibility of death or personal injury. Follow instructions in the safety message.

  • Page 38: The Industrial/Agricultural Mower

    The Industrial/Agricultural Mower Industrial/Agricultural Mower Types Mowers are used for pasture clipping, crop residue shredding, heavy brush cutting, waterways, right-of- ways, roadside or highway mowing. Also, these mowers are used for cutting grass and other growth in public areas such as parks and cemeteries. Folding Wing Rotary The Industrial/Agricultural Mower Agricultural Disc Mower Types...

  • Page 39: Follow A Safety Program

    Follow A Safety Program Protect Yourself Wear personal protective clothing and Personal Protective Equipment (PPE) issued to you or called for by job conditions. You must ALWAYS wear safety glasses with side shields. You may also need: — Hard hat —...
  • Page 40 Follow A Safety Program Avoid Injury From Raised Equipment Avoid possible crushing injury from falling mower or other raised equipment. Avoid Crushing – Securely Support Before working near or under raised mower or equipment parts: — Securely support or block up raised mower or equipment parts according to the operator’s manual.
  • Page 41 Follow A Safety Program Be Alert! Know where to get assistance. Know how to use a fi rst aid kit and fi re extinguisher/fi re suppression system. Be Aware! Take advantage of training programs offered. Be Careful! Human error is caused by many factors: carelessness, fatigue, overload, preoccupation, unfamiliarity of operator with the machine, drugs, and alcohol to name a few.
  • Page 42 Follow A Safety Program Some Rules You Must Work By (continued) — Only qualifi ed and authorized individuals may operate this equipment. — Never allow children to play on, ride on or operate the equipment. Children are not qualifi ed to operate this equipment.

  • Page 43: Prepare For Safe Operation

    Prepare For Safe Operation Check The Mower And Tractor Equipment Before beginning your work day inspect the machine and have all systems in good operational condition. WARNING! Prevent possible crushing injury from falling equipment. Hydraulic system or part failure could cause unsupported equipment to fall.
  • Page 44 Prepare For Safe Operation Know The Work Area Before you operate the mower thoroughly inspect the work area. Walk around the area and inspect the surfaces you will travel on when using the mower. Locate and avoid: — Deep mud —...
  • Page 45 Prepare For Safe Operation Tractor And Mower Controls Safety Test Start the tractor following the specifi c procedures in the manufacturer’s operator’s manual. These procedures normally include: — Fasten and adjust seat belt on your ROPS-equipped tractor. — Check parking brake for engagement. —...
  • Page 46 Prepare For Safe Operation Hitching Mower To Tractor Three-point hitch-mounted mowers: — Refer to mower and tractor manufacturers’ manuals. — Place tractor’s hydraulic power lift (rockshaft) selector lever in down position to avoid unexpected movement. — Explain the hitching procedures to those operators who cannot read.

  • Page 47: Start Safely

    Make The Right Start Mow only in daylight or good artifi cial light conditions. Avoid serious injury or death from mower-thrown objects or blade contact: — Keep chain shields, fl exible or solid defl ector shields or discharge chutes in place and in good repair. —...
  • Page 48 Mower-Thrown Objects (continued) Disc Mowers — When using a disc mower it is important to know the area to be mowed. If the operator has mowed the fi eld before and is familiar with all obstacles that may be present, it is suffi cient to watch ahead of the mower path for any additional objects that may have entered the fi eld.
  • Page 49 Under Mount Mower Safety Practices When mowing with an under mount mower: — Keep removable discharge chute in place and over discharge opening. — Never stand on a mower housing when the tractor engine is operating. — Distribute grass clippings with discharge chute facing mowed area.
  • Page 50 Wing And Side Mount Mowers Safety Practices Raised wing positions reduce shielding protection and increases the thrown object and blade contact hazard risks. Avoid possible serious injury or death by thrown objects or blade contact from raising and lowering wings during mowing operations: —...
  • Page 51 Uneven Terrain Mowing Safety Practices (continued) — Use extreme care to maintain control over the equipment when operating in these conditions. — Increase tractor stability by adding wheel weights, ballast and increasing wheel spacing to maximum. Refer to operator’s manual for recommendations. —...

  • Page 52: Park Safely

    Parking Safety Practices — Use designated or out-of-traffi c areas. — Use fi rm level ground locations. — Set parking brake. — Lower raised equipment to ground. Shut down the mower and tractor using proper equipment shut down practice before dismounting tractor.

  • Page 53: Perform Maintenance Safely

    Dismounting Properly — Never dismount from moving equipment. — Never jump from any machines. — Dismount carefully. — Check for slippery steps. — Keep feet and hands away from controls. — Use handholds and steps during dismount. — Face machine and use three-point contact (2 hands and 1 foot or 2 feet and 1 hand).
  • Page 54 Perform Maintenance Safely Prepare Yourself Wear personal protective clothing and Personal Protective Equipment (PPE) issued to you or called for by job conditions. You must ALWAYS wear safety glasses with side shields. You may also need: — Hard hat — Safety shoes —...
  • Page 55 Perform Maintenance Safely Prepare The Machine Stored energy sources (electrical, mechanical, hydraulic, pneumatic, chemical, thermal, etc.) must be controlled or reduced to a practical minimum before performing any maintenance, repair or service procedures. Safety practices to prevent potential injuries from energy-releasing sources: —...
  • Page 56 Perform Maintenance Safely Perform Maintenance Safely Use Proper Ventilation If it is necessary to run an engine in an enclosed area, remove the exhaust fumes from the area with an exhaust pipe extension. If you do not have an exhaust pipe extension, make sure you open the doors and get outside air into the area.
  • Page 57 Perform Maintenance Safely Hydraulic System Hazards The hydraulic system is under pressure whenever the engine is operating and may hold pressure even after the engine is shut off. Cycle all hydraulic controls including the auxiliary hydraulic control after the engine is shut down.
  • Page 58 Perform Maintenance Safely Avoid Explosion WARNING! Avoid possible serious injury from explosion. Lead-acid batteries produce extremely explosive gases especially when being charged. Keep arcs, sparks, fl ames and lighted tobacco away. — Do not smoke near batteries. — Keep arcs, sparks and open fl ames away from batteries.
  • Page 59 Perform Maintenance Safely Tire And Wheel Maintenance (continued) WARNING! The types of wheels and tires usually found on this equipment require special care when servicing to prevent death or serious injury. Do not infl ate the tires above the recommended pressure.

  • Page 60: Final Word To The User

    Perform Maintenance Safely Mower Blade Maintenance (continued) — How are mower blades made? Mower blades are made of high strength alloy spring steel. They are hot-forged and shaped to meet the manufacturer’s individual specifi cations, then heat treated and tempered to a high strength, ductile state to reduce the possibility of breaking while mowing.

  • Page 62: Reconocimiento

    Contenido Reconocimiento Deseamos reconocer las contribuciones de los miembros del Consejo de Fabricantes de Cortadoras de Césped Industriales/para Agricultura para la preparación de este Manual de seguridad. Copyright, 2010, por la Asociación de Fabricantes de Equipos (Association of Equipment Manufacturers). Todos los derechos reservados. Queda prohibida la reproducción o difusión parcial o total de este trabajo por cualquier medio sin consentimiento previo por escrito de la Asociación de Fabricantes de Equipos.

  • Page 63: Alertas De Seguridad

    Alertas de seguridad Símbolo Este símbolo de alerta de seguridad signifi ca: “¡ATENCIÓN! ¡MANTÉNGASE ALERTA! ¡SU SEGURIDAD ESTÁ EN RIESGO!” El símbolo de alerta de seguridad identifi ca mensajes de seguridad importantes sobre el equipo, sobre letreros de seguridad, en manuales u otros lugares. Cuando vea este símbolo, manténgase alerta ante la posibilidad de muerte o lesiones personales.

  • Page 64: Cortadora De Césped Industrial/Para Agricultura

    Cortadora de césped industrial/para agricultura Tipos de cortadora de césped industrial/para agricultura Las cortadoras de césped se usan para recortar pasturas, desmenuzar residuos de cultivos, cortar arbustos, realizar desbroce pesado, cortar la hierba en vías de agua, derechos de paso, costados de caminos o autopistas. Además, estas cortadoras se usan para cortar la hierba y otras plantas en zonas públicas como parques y cementerios.

  • Page 65: Cumplimiento Del Programa De Seguridad

    Cumplimiento del programa de seguridad Protéjase a sí mismo Use la ropa de protección personal y los equipos de protección personal (PPE) que se le proporcionen o que requieran las condiciones del trabajo. SIEMPRE debe usar gafas de seguridad con escudos laterales. Puede necesitar también: —...
  • Page 66 Cumplimiento del programa de seguridad Evite las lesiones provocadas por equipos elevados Evite posibles lesiones de aplastamiento por caídas de la cortadora u otros equipos elevados. Evite ser aplastado – con seguridad la Antes de trabajar cerca o debajo de partes levadas de la cortadora o de los equipos: —...
  • Page 67 Cumplimiento del programa de seguridad ¡Manténgase alerta! Sepa dónde obtener asistencia. Sepa cómo usar un equipo de primeros auxilios y un extintor de incendios/ sistema de supresión de fuego. ¡Manténgase informado! Aproveche los programas de capacitación que se ofrecen. ¡Tenga cuidado! El error humano es causado por muchos factores: descuido, fatiga, sobrecarga, preocupación, desconocimiento de la máquina por parte del operador, fármacos y alcohol,...
  • Page 68 Cumplimiento del programa de seguridad Algunas reglas que debe cumplir al trabajar (continuación) — Únicamente personas cualifi cadas y autorizadas pueden manejar estos equipos. — Nunca permita que los niños jueguen en los equipos, viajen en ellos o los hagan funcionar. Los niños no están cualifi cados para manejar estos equipos.

  • Page 69: Preparación Para Una Operación Segura

    Preparación para una operación segura Revise los equipos de la cortadora de césped y el tractor Antes de comenzar la jornada de trabajo, inspeccione la máquina y asegúrese de que todos los sistemas estén en buenas condiciones operacionales. ¡ADVERTENCIA! Evite posibles lesiones por aplastamiento producidas por equipos que caen.
  • Page 70 Preparación para una operación segura Familiarícese con la zona de trabajo Antes de hacer funcionar la cortadora de césped, inspeccione cuidadosamente la zona de trabajo. Recorra a pie alrededor de la zona e inspeccione las superfi cies sobre las cuales se desplazará cuando utilice la cortadora. alrededor del lugar Localice y evite: —...
  • Page 71 Preparación para una operación segura Prueba de seguridad de los controles del tractor y de la cortadora de césped Arranque el tractor siguiendo los procedimientos específi cos del manual del operador del fabricante. Estos procedimientos normalmente incluyen: — Colóquese y ajústese el cinturón de seguridad en el tractor equipado con ROPS.
  • Page 72 Preparación para una operación segura Enganche de la cortadora de césped al tractor Cortadoras montadas en enganche de tres puntos: — Consulte los manuales de los fabricantes de la cortadora y del tractor. — Coloque la palanca selectora de elevación de potencia hidráulica del tractor en la posición descendida para evitar movimientos imprevistos.

  • Page 73: Arranque Con Seguridad

    Arranque con seguridad Cómo realizar un arranque correcto Corte la hierba únicamente con luz diurna o en condiciones de buena luz artifi cial. Evite lesiones graves o muerte producidas por objetos arrojados por la cortadora o por el contacto con las hojas: —...
  • Page 74 Operación con seguridad Objetos arrojados por la cortadora de césped (continuación) Cortadoras de disco — Cuando se usa una cortadora de disco, es importante conocer la zona donde se va a cortar. Si el operador ha realizado cortes en el terreno antes y está...
  • Page 75 Operación con seguridad Prácticas de seguridad para la cortadora de césped de montaje inferior Cuando se traslada con una cortadora de césped de montaje inferior: — Mantenga la rampa de descarga extraíble en su lugar y por encima de la abertura de descarga. —...
  • Page 76 Operación con seguridad Prácticas de seguridad para cortadoras de césped con laterales y montaje lateral Las posiciones elevadas de los laterales reducen la protección de los escudos y aumentan los riesgos de objetos arrojados y contacto con las hojas. Evite la posibilidad de lesiones graves o muerte por objetos arrojados o contacto con las hojas causados por la elevación y el descenso de los laterales durante las operaciones de corte:...
  • Page 77 Operación con seguridad Prácticas de seguridad para trabajos de corte en terrenos desparejos (continuación) — Use extremo cuidado para mantener el control de los equipos cuando trabaja en estas condiciones. — Aumente la estabilidad del tractor agregando pesos o lastre en las ruedas y aumentando al máximo la separación entre las ruedas.

  • Page 78: Estacionamiento Seguro

    Estacionamiento seguro Prácticas de seguridad para el estacionamiento — Use las zonas designadas o alejadas del tránsito. — Use lugares con suelo fi rme y nivelado. — Aplique el freno de estacionamiento. — Descienda el equipo de la cortadora de césped hasta el suelo.

  • Page 79: Realización De Mantenimiento Con Seguridad

    Apagado con seguridad Descenso correcto — Nunca descienda de equipos en movimiento. — Nunca baje de una máquina saltando. — Descienda con cuidado. — Verifi que que no haya peldaños resbaladizos. — Mantenga los pies y las manos lejos de los controles. —...
  • Page 80 Realización de mantenimiento con seguridad Preparación personal Use la ropa de protección personal y los equipos de protección personal (PPE) que se le proporcionen o que requieran las condiciones del trabajo. SIEMPRE debe usar gafas de seguridad con escudos laterales. Puede necesitar también: —...
  • Page 81 Realización de mantenimiento con seguridad Preparación de la máquina Deben controlarse o reducirse las fuentes de energía almacenada (eléctricas, mecánicas, hidráulicas, neumáticas, químicas, térmicas, etc.) al mínimo practicable antes de realizar cualquier procedimiento de mantenimiento, reparación o servicio. Prácticas de seguridad para prevenir posibles lesiones por fuentes que liberan energía: —...
  • Page 82 Realización de mantenimiento con seguridad Use ventilación adecuada Si es necesario hacer funcionar un motor en una zona cerrada, elimine del área las emanaciones de escape con una extensión del caño de escape. Si no tiene esa extensión, asegúrese de abrir las puertas y dejar entrar aire del exterior.
  • Page 83 Realización de mantenimiento con seguridad Riesgos del sistema hidráulico El sistema hidráulico se encuentra bajo presión siempre que el motor está funcionando; puede conservar presión incluso después de apagar el motor. Haga funcionar todos los controles hidráulicos incluyendo el control hidráulico auxiliar después de que el motor esté...
  • Page 84 Realización de mantenimiento con seguridad Evite explosiones ¡ADVERTENCIA! Evite posibles lesiones graves por explosiones. Las baterías de plomo-ácido producen gases sumamente explosivos, especialmente durante la carga. Mantenga alejados los arcos, las chispas, las llamas y el tabaco encendido. — No fume cerca de las baterías. —...
  • Page 85 Realización de mantenimiento con seguridad Mantenimiento de neumáticos y ruedas (continuación) ¡ADVERTENCIA! Los tipos de ruedas y neumáticos que generalmente se encuentran en estos equipos requieren cuidados especiales al realizar servicios para evitar lesiones graves o la muerte. No infl e los neumáticos por encima de la presión recomendada.

  • Page 86: Palabras Fi Nales Para El Usuario

    Realización de mantenimiento con seguridad Mantenimiento de las hojas de la cortadora (continuación) — ¿Cómo están hechas las hojas de la cortadora de césped? Están hechas acero para resortes de aleación de alta resistencia. Se forjan en caliente y se les da forma para cumplir con las especifi caciones individuales del fabricante;...

  • Page 87: Introduction Section

    INTRODUCTION SECTION Introduction Section 2-1 © 2011 Alamo Group Inc.
  • Page 88 Indicates an imminently hazardous situation that, if not avoided, MAY result in MINOR INJURY. Identifies special instructions or procedures that, if not strictly observed, could result in damage to, or destruction of the machine, attachments or the environment. FN180/FN120 01/11 © 2011 Alamo Group Inc. INTRODUCTION Introduction Section 2-2...

  • Page 89: Equipment Specifications

    The Rhino Model FN180/FN120 Rotary Cutter is designed primarily for weed, grass, and brush up to 5" diameter and consists of a center unit with two variable position wings together having a cutting width of 15-10- 1/2feet. Wing operating angles and machine cutting height are independently controlled using hydraulic cylinders.

  • Page 90: Key Operation Points

    B. Shield Bearings are wearing parts and are not warrantable. C. Slip-Clutch Disks are wearing parts and are not warrantable. Evidence of "burning up" Slip Clutch Plates due to improper adjustment will void warranty on Slip Clutch Parts. FN180/FN120 01/11 © 2011 Alamo Group Inc. INTRODUCTION...

  • Page 91: Rhino Limited Warranty

    ATTENTION: Purchaser should fill in the blanks below for his reference when buying repair parts and/or for proper machine identification when applying for warranty. Rhino Implement Model________________________________ Serial Number________________________ Date Purchased______________________________________ Dealer_______________________________ ATTENTION: READ YOUR OPERATOR'S MANUAL FN180/FN120 01/11 © 2011 Alamo Group Inc. INTRODUCTION RHINO ® 1020 S Sangamon Ave.

  • Page 93: Assembly Section

    ASSEMBLY SECTION Assembly Section 3-1 © 2011 Alamo Group Inc.

  • Page 94: Dealer Set-Up Instructions

    Follow the instructions on the jack. Install the jack retaining pin. Measure the height of the tractor drawbar and raise the implement tongue to the same height. FN180/FN120 01/11 © 2011 Alamo Group Inc. ASSEMBLY...
  • Page 95 Continue to apply pressure to cylinders for at least 10 seconds to assure they have filled with fluid. Keep coworkers and bystanders away from the implement while filling. FN180/FN120 01/11 © 2011 Alamo Group Inc. ASSEMBLY Assembly Section 3-3...
  • Page 96 Do not stand outside of the wing to remove the shipping strap, if the wing fell it could kill you. Make sure no bystanders are under the wing or in the area where the wing could fall. Reinstall nut and flatwasher to retain side skirt. FN180/FN120 01/11 © 2011 Alamo Group Inc. ASSEMBLY...

  • Page 97: Connecting Driveline

    PTO adapter. Consult an authorized dealer for assistance if the Implement driveline does not match the Tractor PTO. (S3PT-14) FN180/FN120 01/11 © 2011 Alamo Group Inc. ASSEMBLY Assembly Section 3-5...

  • Page 98: Driveline Attachment

    1. Remove bolts from main driveline implement connection yoke and insert onto power divider gearbox shaft. Install bolts according to driveline clamp yoke instructions in this section. FN180/FN120 01/11 © 2011 Alamo Group Inc. ASSEMBLY...

  • Page 99: Tires And Wheels

    INJURY. Do not exceed 20 M.P.H. on Airplane or Rib Implement Tires. Maximum airplane tire inflation pressure is 50 PSI, minimum inflation pressure is 20 PSI. Inflate ribbed implement tires to manufacturer rated PSI as shown on the tire sidewall. FN180/FN120 01/11 © 2011 Alamo Group Inc. ASSEMBLY...
  • Page 100 ASSEMBLY Lubricate the PTO drivelines and wheel hubs according to the lubrication information found in the Maintenance Section. FN180/FN120 01/11 Assembly Section 3-8 © 2011 Alamo Group Inc.

  • Page 101: Driveline Clamp Cone Yoke Operating Instructions

    Regularly check the driveline yoke to ensure a tight connection. To remove the yoke, remove the bolts and pull yoke off the shaft. Mower is now assembled and ready for pre-delivery checks. FN180/FN120 01/11 Assembly Section 3-9 © 2011 Alamo Group Inc.

  • Page 103: Operation Section

    OPERATION SECTION Operation Section 4-1 © 2011 Alamo Group Inc.

  • Page 104: Operation Instructions

    Pictures contained in this section are intended to be used as a visual aid to assist in explaining the operation of a flex-wing rotary mower and are not necessarily of a FN180/FN120 NITRO cutter. Some pictures may show shields removed for picture clarity. NEVER OPERATE this implement without all shields in place and in good operational condition.

  • Page 105: Operator Requirements

    Serious injury or death to the operator or others could result if the operator is under the influence of drugs or alcohol. FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION...

  • Page 106: Tractor Requirements

    ASABE approved Roll-Over Protective Structure (ROPS) or ROPS cab and seat belt. • Tractor Safety Devices ... Slow Moving Vehicle (SMV) emblem, lighting, • Tractor Horsepower -Minimum ... FN120 NITRO, FN180 NITRO 70HP • -Maximum ... 540 RPM Unit-200 HP; 1000 RPM Unit 250 HP •...

  • Page 107: Tractor Horsepower

    If the tractor is equipped with only two hydraulic ports and a 3-spool control valve is not used, the wings cannot be operated independently and will raise and lower at different speeds. FN180/FN120 01/11 © 2011 Alamo Group Inc.

  • Page 108: Front End Weight

    Mower blades driving the Tractor transmission even though the Tractor clutch has been disengaged. Install an over running clutch between the Tractor PTO and the Mower driveline to prevent this potentially dangerous situation. FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION...

  • Page 109: Tire Spacing

    Implement, and are physically large enough to reach and operate the controls easily. Never allow children or other persons to ride on the Tractor or Implement. Falling off can result in serious injury or death. FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION (SG-12)

  • Page 110: Dismounting The Tractor

    Never bypass the ignition switch by short circuiting the starter solenoid. After the tractor engine is running, avoid accidental contact with the tractor transmission to prevent sudden and unexpected tractor movement. OPS-U-0028 FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION...

  • Page 111: Connecting The Mower To The Tractor

    Turn off the tractor engine, place the tractor in park, and set the parking brake before dismounting. FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION (SG-23) (SG-13)

  • Page 112: Connecting Mower Hydraulic Lines To The Tractor

    Assembly Section for additional information on equipping the tractor with a 3-spool control valve. Mount the valve bank to a tractor fender or other accessible location. Connect valve bank inlet and outlet lines FN180/FN120 01/11 © 2011 Alamo Group Inc.

  • Page 113: Setting The Mower

    Never work under the Implement, the framework, or any lifted component unless the Implement is securely supported or blocked up to prevent sudden or inadvertent falling which could cause serious injury or even death. FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION (SG-14)

  • Page 114: Setting Deck Height

    To lower the wing, loosen the jamnut and shorten the screw assembly, lengthen the screw assembly to raise the wing. After wings are leveled, retighten jamnuts to maintain settings. FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION place...

  • Page 115: Setting Deck Pitch

    PTO shaft, release the locking collar, and position the yoke until the locking collar balls are seated onto the PTO shaft. Push and pull the driveline back and forth several times to ensure a secure attachment. OPS-R-0003_A FN180/FN120 01/11 Operation Section 4-13 © 2011 Alamo Group Inc.

  • Page 116: Driveline Length Check

    2” at any point there is a potential problem bottoming out the driveline and the driveline should be replaced with shorter driveline. Contact your local dealer or Technical Service for proper directions. OPS-R-0004_J FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION...
  • Page 117 NOTE: If the driveline cannot be shortened and still maintain the required profile engagement, the operator must be made aware of terrain conditions and avoid situations which pose a potential problem to avoid damaging the driveline or move drawbar to 16” or 20” position for required clearance. OPS-R-0005_O FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION...

  • Page 118: Constant Velocity (Cv) Driveline

    Position the mower at multiple angles and perform the above procedure. Determine the sharpest turning radius that maintains a safe operating angle and note this position to the operator. OPS-R-0006 FN180/FN120 01/11 Operation Section 4-16 © 2011 Alamo Group Inc.

  • Page 119: Pre-Operation Inspection And Service

    Look for loose fasteners, worn or broken parts, and leaky or loose fittings. Make sure all pins have cotter pins and washers. Serious injury may occur from not maintaining this machine in good working order. FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION (SRM-04)

  • Page 120: Tractor Pre-Operation Inspection/Service

    Replace bent or broken blades with new blades. NEVER ATTEMPT TO STRAIGHTEN, WELD, OR WELD HARDFACING ON BLADES SINCE THIS WILL LIKELY CRACK OR OTHERWISE DAMAGE THE BLADE WITH SUBSEQUENT FAILURE AND POSSIBLY CAUSE SERIOUS INJURY FROM THROWN BLADES. FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION The following...
  • Page 121 • Ensure the driveline integral shields are in good condition and rotate freely. • Inspect that all bolts and screws are in position and are properly torqued. OPS-R-0009 FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION Operation Section 4-19...
  • Page 122 Ensure carrier hub nuts are tightened with the cotter pin inserted and spread. • Inspect the condition of the deck skid shoes and the skid shoe attaching hardware. OPS-R-0012 FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION Operation Section 4-20...
  • Page 123 OPS-R-0014_A • Before mower operation ensure that the bolt is removed from both floating links on the unit. These bolts are for shipping purposes only. OPS-R-0086 FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION Operation Section 4-21...

  • Page 124: Cutting Component Inspection

    OPERATION 8.3 Cutting Component Inspection Inspect blade pan and blade assembly for the following: OPS-U-0031 FN180/FN120 01/11 Operation Section 4-22 © 2011 Alamo Group Inc.
  • Page 125 Failure to replace abnormally worn blades may lead to catastrophic failure of the blades and ejection of the broken part with tremendous force which may cause serious bodily injury or death. OPS-U-0032 FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION...

  • Page 126: Blade Bolt Inspection

    Failure to replace abnormally worn blade bolts may lead to catastrophic failure of the blades and ejection of the broken part which may cause serious bodily injury or death. Always replace Blade Bolts with new bolts whenever replacing the Blades. OPS-U-0037 FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION...
  • Page 127 Blades are not chipped, cracked or bent Blade bolts are tight Wheel lug nuts are tight Transport locks are in good condition Operator’s Signature: DO NOT OPERATE an UNSAFE TRACTOR or MOWER FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION Make ____________________ ________________ Shift...
  • Page 128 The engine coolant fluid level is full The radiator is free of debris The air filter is in good condition Operator’s Signature: DO NOT OPERATE an UNSAFE TRACTOR or MOWER FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION Make ____________________ ________________...

  • Page 129: Driving The Tractor And Implement

    When operating in traffic always use the Tractor’s flashing warning lights and reduce your speed. Be aware of traffic around you and watch out for the other guy. FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION...

  • Page 130: Starting The Tractor

    (wings) and extend (center). Only operate the mower with both wings fully lowered, NEVER operate the mower with a raised wing. Wait until the blades are at a complete stop before raising wings. OPS-R-0015 FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION...

  • Page 131: Transport Position

    DO NOT operate the mower with the valves in the detent position for extended periods of time to prevent deck frame damage. OPS-R-0017 FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION Never fold wings on a hillside...the...

  • Page 132: Driving The Tractor And Cutter

    Use extreme caution when operating on steep slopes. Keep the tractor in a low gear when going downhill. DO NOT coast or free-wheel downhill. OPS-R-0018 FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION (S3PT-05) Operation Section 4-30 Make sure no...

  • Page 133: Crossing Ditches And Steep Inclines

    When crossing such terrain, the implement should be fully lowered for a lower center of gravity and added stability. OPS-R-0021 FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION Operation Section 4-31...

  • Page 134: Operating The Tractor And Implement

    Stop mowing immediately if blades strike a foreign object. Repair all damage and make certain rotor or blade carrier is balanced before resuming mowing. FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION Inspect the area before (SGM-05)

  • Page 135: Foreign Debris Hazards

    If a bystander comes within 300 feet of the tractor while the mower is being operated, stop the tractor at once, idle the engine and disengage the PTO. Do not engage the PTO again until all bystanders are well past the 300 foot distance. OPS-R-0024 FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION...

  • Page 136: Engaging The Power Take Off (Pto)

    Do not put hands or feet under mower decks. Blade Contact can result in serious injury or even death. Stay away until all motion has stopped and the decks are securely blocked up. FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION...

  • Page 137: Pto Rpm And Ground Speed

    When mowing in reverse, operate the tractor and mower at a reduced ground speed to ensure tractor and mower control is maintained. OPS-R-0026_J FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION...
  • Page 138 -Never allow clippings or debris to collect near drivelines, slip clutches, and gearboxes. Periodically shut down the Tractor and Mower and clean clippings and collected debris from the mower deck. (SGM-12) FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION (SGM-1)
  • Page 139 Stay alert and watch for trees, low hanging limbs, power lines, and other overhead obstacles and solid ground objects while you are operating. to avoid hitting these items OPS-R-0028 FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION Never raise the Use care...
  • Page 140 Always avoid operating the mower at a height or position which may cause the blades to contact the ground. Cutting into the berm or edge of the ditch will cause abnormal and accelerated blade wear and possible blade component failure. OPS-R-0029 FN180/FN120 01/11 Operation Section 4-38 © 2011 Alamo Group Inc.

  • Page 141: Right Of Way (Highway) Mowing

    Mower sections or wings are adjusted to be close and parallel to ground without exposing blades. • MOWING AREA has been inspected and foreign materials and debris have been removed. • PASSERSBY are inside enclosed vehicle. FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION OPS-U-0040 Operation Section 4-39...

  • Page 142: Shutting Down The Implement

    Always shut the Tractor completely down, place the transmission in park, and set the parking brake before you or anyone else attempts to connect or disconnect the Implement and Tractor hitches. FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION (S3PT-15)
  • Page 143 After the driveline has been removed from the tractor, place the PTO master shield back in the operating position. OPS-R-0031 FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION (STI-04) The jack...

  • Page 144: Mower Storage

    By using good judgement and following safe transport procedures, the possibility of accidents while moving between locations can be substantially minimized. OPS-U- 0017 FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION...
  • Page 145 Use extreme caution and avoid hard applications of the tractor brakes when towing heavy loads at road speeds. Never tow the implement at speeds greater than 20 MPH (32 kph). OPS-U- 0018 FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION (SG-10) NOTE: When...

  • Page 146: Tire And Wheels

    When replacing a tire assembly on center axle always check diameters to make sure tires fall within allowed range for maximum tire and wheel life. It may be necessary to move one or more tires from wing axles to remain within size limit. FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION...

  • Page 147: Transporting On Public Roadways

    Replace the SMV emblem if faded, damaged, or no longer reflective. OPS-U- 0020 FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION (STI-06) (SG-10)
  • Page 148 OPS- U- 0022 Reduce speed before turning or applying the brakes. Ensure that both brake pedals are locked together when operating on public roads. OPS-U- 0023 FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION roads, have...

  • Page 149: Hauling The Tractor And Implement

    If during transport a hard braking, sharp turning, or swerving action was performed, stop at the next safe location to inspect the security of the load. FN180/FN120 01/11 Operation Section 4-47 © 2011 Alamo Group Inc.

  • Page 150: Trouble Shooting Guide

    Clutch Slips Excessively Clutch linings badly worn or plates warped. Too much power for clutch. Oil on facings. Friction facings glazed. FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION Remedy Tighten if loose. Tighten if loose. Replace shaft if bent.
  • Page 151 Cutting too high. Windrowing Material heavy and lush. or Uneven Material Distribution Excessive ground speed Conditions too wet. FN180/FN120 01/11 © 2011 Alamo Group Inc. OPERATION Reduce ground speed. Replace blades. (Refer to "Maintenance" section). Adjust. (Refer to "Assembly" section) Adjust Mower height.

  • Page 153: Maintenance Section

    MAINTENANCE SECTION Maintenance Section 5-1 ©2011 Alamo Group...

  • Page 154: Hazards With Maintenance Of Implement

    California to cause cancer, birth defects or other reproductive harm. • Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. FN180/FN120 01/11 ©2011 Alamo Group MAINTENANCE CONDITION...

  • Page 155: Parts Information

    Use Multi-Purpose Gear Oil P/N 00786250 when required in Gearbox. Use N.L.G.I #2 grease for all locations designated with grease gun. Be sure to clean the fitting thoroughly before using grease gun. Failure to maintain proper lubrication will result in damage to U-joints, gearbox, and/or driveshaft. FN180/FN120 01/11 ©2011 Alamo Group MAINTENANCE...
  • Page 156 MAINTENANCE FN180/FN120 01/11 Maintenance Section 5-4 ©2011 Alamo Group...

  • Page 157: Center & Wing Gearboxes

    Many of the equipment components are HEAVY (60 lbs. or greater) and Special Lifting Procedures are recommended. Use lifting assistance such as mechanical assistance, two people, or proper lifting techniques when handling, removing or installing components to reduce the possibility of back injuries. FN180/FN120 01/11 ©2011 Alamo Group MAINTENANCE Maintenance Section 5-5...

  • Page 158: Drivelines

    CV Center Housing (80º CV) CE & Non-Rotating Guard Bushings (1000 RPM MAX.) * Constant Angle applications may require a Lube Interval of 4 hours. ROTATING GUARD BUSHINGS SHOULD BE LUBRICATED UPON REPLACEMENT FN180/FN120 01/11 ©2011 Alamo Group MAINTENANCE 80º CV DRIVELINE STANDARD...

  • Page 159: Main Cv Driveline Shield Service Instructions

    Figure Mnt-R-0359 MPORTANT! Check that Guard Missing decal on steel tube under inner guard and Rotating Driveline Decal are firmly affixed, undamaged and readable. If not, replace. FN180/FN120 01/11 ©2011 Alamo Group MAINTENANCE Maintenance Section 5-7...

  • Page 160: Wing Driveline

    (Figure MntP-R-0012) Grasp the Yoke and shield tube and pull shaft from the shield. (Figure MntP-R-0013) Grease the shield bearing grooves on the yokes and the inner telescoping member before assembly. FN180/FN120 01/11 Maintenance Section 5-8 ©2011 Alamo Group...
  • Page 161 The shield bearings should be installed in the direction of the shaft rotation relative to the shields. (Figure MntP-R-0017) Attach safety decal as needed. FN180/FN120 01/11 Maintenance Section 5-9 ©2011 Alamo Group...

  • Page 162: Integral Friction Clutch Maintenance

    INSPECTION: 5. Inspect the steel and iron parts for wear, warping or cracking and replace if necessary. 6. Clean any rust from the plate surfaces with a wire brush or steel wool. FN180/FN120 01/11 ©2011 Alamo Group MAINTENANCE Maintenance Section 5-10...
  • Page 163 1. Mount and clamp the clutch hub onto the implement input shaft. Make sure the grooves of the shaft and clutch line up. 2. Reinstall any shielding that was moved or removed. The clutch must be run-in before it is used. Follow the instructions for run-in of the clutch. FN180/FN120 01/11 ©2011 Alamo Group MAINTENANCE Maintenance Section 5-11...

  • Page 164: Blade Servicing

    NOTE: Replace Blades in pairs after no more than 1/2" notch wear! FN180/FN120 01/11 ©2011 Alamo Group MAINTENANCE...

  • Page 165: Blade Sharpening

    Avoid personal injury. Blade and/or blade carrier removal should be done only with the tractor engine shut off, key removed, in neutral, parking brake on, PTO disengaged, and the cutter blocked in the raised position. FN180/FN120 01/11 ©2011 Alamo Group MAINTENANCE...

  • Page 166: Blade Bolt Inspection

    Failure to replace abnormally worn blade bolts may lead to catastrophic failure of the blades and ejection of the broken part which may cause serious bodily injury or death. Always replace Blade Bolts with new bolts whenever replacing the Blades. FN180/FN120 01/11 ©2011 Alamo Group MAINTENANCE...

  • Page 167: Blade Carrier Inspection

    FN180/FN120 01/11 ©2011 Alamo Group MAINTENANCE...

  • Page 168: Wheel Hub Assembly

    Do not exceed 15 M.P.H. on Airplane or Rib Implement Tires. Maximum airplane tire inflation pressure is 50 PSI, minimum inflation pressure is 20 PSI. Inflate ribbed implement tires to manufacturer rated PSI as shown on the tire sidewall. FN180/FN120 01/11 ©2011 Alamo Group MAINTENANCE The Wheel Hub Assemblies need to be lubricated on a weekly basis.

  • Page 169: Tongue

    Replace as needed. The Drawbar 1" Bolt fastens the mower to the tractor Drawbar. When the mower is unhitched and this 1" Bolt is removed, examine for signs of cracking or wear. Replace the Drawbar 1" Bolt at first sign of either problem. FIGURE Op-1155 FN180/FN120 01/11 Maintenance Section 5-17 ©2011 Alamo Group...

  • Page 170: Hydraulic Hoses

    Cylinder immediately before the Cylinder is damaged or too much hydraulic fluid is lost. MAXIMUM ALLOWABLE OPERATING OIL TEMPERATURE Do not operate this implement if the tractor hydraulic oil temperature exceeds 200°F FN180/FN120 01/11 ©2011 Alamo Group MAINTENANCE...

  • Page 171: Flex Wing Hydraulic Cylinder Replacement Instructions

    Check the hydraulic reservoir of the tractor to ensure there is sufficient oil. If the wing is to remain in the raised position attached the wing transport latch. FN180/FN120 01/11 ©2011 Alamo Group MAINTENANCE Maintenance Section 5-19...

  • Page 172: Storage

    Store the cutter in a clean, dry place with the cutter housing resting on blocks. Use spray touch-up enamel where necessary to prevent rust and maintain the appearance of the cutter. FN180/FN120 01/11 ©2011 Alamo Group MAINTENANCE Maintenance Section 5-20...

  • Page 173: Proper Torque For Fasteners

    NOTE: These values apply to fasteners as received from supplier, dry or when lubricated with normal engine oil. They do not apply if special graphited or molydisulphide greases or other extreme pressure lubricants are used. This applies to both UNF fine and UNC coarse threads. FN180/FN120 01/11 Maintenance Section 5-21 ©2011 Alamo Group...
  • Page 175 PARTES INFORMACIÓN SEGURIDAD Inc. Group Alamo 01/11 FN180/FN120 Walnut 1502 dirección Translations, manual necessita ingles. calcomanias Para RHINO auténticas cortadora cionamiento llegan regularmente auténticas partes Estas cojinetes.
  • Page 176 MANTENIMIENTO REPARACIÓN SERVICIO, MANTENIMIENTO REPARACIÓN CONDICIONES BUENAS IMPLEMENTOS MANTENIMIENTO SEGURIDAD Inc. Group Alamo 2011 01/11 FN180/FN120 causan químicos determinado accesorios baterías terminales California estado químicos algunos igual motor, escape cubierta protector, cualquier REEMPLACE PTO, integrales...
  • Page 177 DEBAJO MUERTE GRAVES LESIONES TRANSPORTE SEGURIDAD Inc. Group Alamo 2011 01/11 FN180/FN120 elevadas. obstrucciones alimentación elevadas alas todas MANTENGA espacio CUENTA TENGA BALIZAS ENCIENDA mojadas. carreteras dirección velocidades bajas evitar para...
  • Page 178 ELÉCTRICOS, CABLES MUERTE GRAVES LESIONES FUEGO SEGURIDAD Inc. Group Alamo 2011 01/11 FN180/FN120 cargar MOTOR APAGUE cajas deslizantes embragues hierba resto todo LIMPIE embrague. placa EMBRAGUES AJUSTE roca. metal como sólidos FORMACIÓN...
  • Page 179 PIES MANOS, ACERQUE CUCHILLA: CONTACTO GIRATORIAS CUCHILLAS LEJOS CUCHILLAS SEGURIDAD Inc. Group Alamo 2011 01/11 FN180/FN120 lesiones. tipo este especializado causar puede hidráulico fluido cuerpo manos MANTENGA cuerpo partes manos verificar para cartón papel seguridad...
  • Page 180 ATENCIÓN PRESTE hayan móviles elementos cuerpo pies manos GRAVES LESIONES EVITAR LÍNEAS ALEJADO SEGURIDAD Inc. Group Alamo 2011 01/11 FN180/FN120 desprotegidas áreas exponer puede consecuencia como implemento puede adaptador ADAPTADOR UTILICE tractor: DISTRIBUIDOR COMUNÍQUESE componentes Lubrique pronunciadas curvas hacer...
  • Page 181 (ROPS) ANTIVUELCO SISTEMA MUERTE GRAVES LESIONES SEGURIDAD Inc. Group Alamo 2011 01/11 FN180/FN120 llave quite móviles partes todas TDF, MOTOR APAGUE cuando tractor baje suba SÓLO TRACTOR: BAJAR SUBIR PERSONAS OTRAS LLEVE...
  • Page 182 CERRADAS elementos corte cortadora, nominal Continuado LANZADOS SEGURIDAD Inc. Group Alamo 2011 01/11 FN180/FN120 parte toda REEMPLACE cortadora INSPECCIONE DETENGA cuando cortadora DETENGA ENCIENDA CUCHILLAS DETENGA cortadora, DESCIENDA retroceda DETENGA CORTADORA OPERAR EVITE...
  • Page 183 OBJETOS METROS(300 MENOS PERSONAS pies) (300 distancia OPERADOR MUERTE ADVERSAS. ARROJAR PUEDEN GIRATORIAS LANZADOS SEGURIDAD Inc. Group Alamo 2011 01/11 FN180/FN120 cordones, postes, piedras, alambres, PERMITA NUNCA ARROJADOS, cuidado ÁREA INSPECCIONE CORTE ALTURA ELEVE funcionamiento, estado buen PROTECTORES MANTENGA lesiones:...
  • Page 184 “estacionar", palanca coloque implemento: implemento tractor implemento: enganche MUERTE GRAVES LESIONES DESCONECTAR CONECTAR SEGURIDAD Inc. Group Alamo 2011 01/11 FN180/FN120 tractor cortadora conecte lenta manera ALAS DESCIENDA área lejos transeúntes MANTENGA alas cilindros LLENE tractor mangueras CONECTE TRABAS QUITAR objetos.
  • Page 185 CINTURONES (ROPS) ANTIVUELCO CAÍDA EQUIPO APLASTAMIENTO CAÍDA MUERTE GRAVE LESIÓN APLASTAMIENTO SEGURIDAD Inc. Group Alamo 2011 01/11 FN180/FN120 lenta manera ALAS DESCIENDA lejos transeúntes MANTENGA alas cilindros LLENE tractor mangueras CONECTE TRABAS QUITAR ANTES falla evitar para...
  • Page 186 Operador, Manual instrucciones SIGA MUERTE, GRAVES LESIONES OPERADOR SEGURIDAD Inc. Group Alamo 2011 01/11 FN180/FN120 señal cualquier REEMPLACE SEGURIDAD: SEÑALES cuchillas. velocidades superar EVITE VELOCIDAD EXCEDA PTO: VELOCIDAD cerrada. tractor cabina susceptibles áreas opere INSECTOS INFESTACIÓN...
  • Page 187 Seguridad Mensajes lista tomando circundante, ambiente ayoría erador. opietario seguridad cuidadoso. PRÁCTICAS SEGURIDAD SEGURIDAD Inc. Group Alamo 2011 01/11 FN180/FN120 está Seguridad Sección 9529; Translations, con: comuníquese obtener desea NOTA: peligrosas. situaciones instrucciones siga Siempre muerte. guridad ensajes cuidadosamente...
  • Page 188 Inc. Group Alamo 2011 © Seguridad Sección SEGURIDAD SECCIÓN...
  • Page 190 Cortadora Seguridad (entregado Cortadora ADMA Conducción Línea (instalada) seguridad operación) (instalación necesario) (instalado (instalado) tractor (entregado) (colocados) seguridad ajuste) (limitador conducción instalación) SEGURIDAD ajustadas bien montaje altura) (ajuste máx.) giro radio (verificar C.V. elevación operación (verificar centro) nivel (ajustar montaje pre-operación iguales) (ajustadas...
  • Page 191 distribuidor: distribuidor: serie: Teléfono: formato – AEM/FEMA formato – AEM/FEMA Cortadoras Video suministrar AEMVideo@alamo-group.com Dirección Vendedor Número Cortadora Operador Cortadora Cortadoras Operador para Cortadoras Operador para para Seguridad dispuesto está cortadora electrónico correo 372-9529 (830) 78155 Seguin, Street Walnut 1502 Services Video correo...
  • Page 192 implicad stará sté, practicas plemento eso, después anualmente pieza código Operador. asistir puede Operador Manual comprender cortadora), VHS. versión solicite 78155, encuentra formulario AEMVideo@alamo- lectrónico Group Alamo acerca egunta algu comprende nueva. cortadora video, mire video: copia entregado haya importante. aprendizaje advertencia mensajes...
  • Page 193 compra: adquirido. RHINO seguridad. maximizar esentar garantía anular especificaciones. estas cumplen según prueban fabrican ganchos hojas, corte, ejes cuchillas, utilizan Rhino cortadoras Partes. correctamente implemento riba trase frontal, cabalmente comprender para desempeño satisfacción comprendido haya manual. este totalidad comprendido antes manual este seguridad...
  • Page 194 $0.00 equipo. operar C01-Cover Instrucciones SIGA máquina esta segura operación 00787290C nº. Parte FLEXIBLE ALETA MECÁNICAS ELEVACIÓN GIRATORIA FN120 FN180/ Inc. Group Alamo ©2011 antes manual este contenidas ENTIENDA, LEA, siempre. unidad esencial parte OPERADOR MANUAL NIVEL CORTADORA/TRITURADORA parts@servis-rhino.com electronico: 60936 Ave.

This manual is also suitable for:

Fn180

Table of Contents