product retention.
After the end of this period, the assembly will no longer be
available.
2. Important safety notice
Components identified by
important for safety. When replacing any of these components,
use only manufacture's specified parts.
3. The S mark means the part is one of some identical parts. For that
reason, it may be different from the installed part.
4. ISO code (Example: ABS-HB) of the remarks column shows
quality of the material and a flame resisting grade about plastics.
5. RESISTORS & CAPACITORS
Unless otherwise specified;
All resistors are in ohms (
All capacitors are in MICRO FARADS (
*Type & Wattage of Resistor
15.1. CABINET AND ELECTRICAL PARTS
mark have special characteristics
) K=1000
, M=1000k
F) P=
F