Accessing The Web Server In The Machine - Sharp BP-50C26 Quick Start Manual

BEFORE USING THE MACHINE
ACCESSING THE WEB SERVER IN THE
MACHINE
When the machine is connected to a network, the machine's built-in Web server can be accessed from a Web browser
on your computer.
OPENING THE WEB PAGES
1
Home
Easy
Copy
Toner
Quantity
2
Status User Control
Machine Identification
Total Count
Device Status
Network Status
Firmware Version
Power Reset
Data List
List for User
List for Administrator
3
20
System Info. Job Status
10:15
Easy Easy Sharp OSA
Scan Fax
Operation Enlarge Settings Job Status
Total Brightness
Display
Guide Count Adjustment
Mode
System Settings
Status Network Status
TCP/IP: Enable
IPv4 Settings:
DHCP: Enable
IPv4 Address: xxx.xxx.xxx.xxx
Subnet Mask: xxx.xxx.xxx.xxx
Default Gateway: xxx.xxx.xxx.xxx
IPv6 Settings:
Top of Page
Tap the [System Info.] key.
Check the IP address in the machine
Logout
information
Access the Web server in the machine
to open the Web pages.
Start a Web browser on a computer that is
connected to the same network as the machine
and enter the IP address of the machine.
Recommended Web browsers
Internet Explorer: 11 or higher (Windows
Microsoft Edge (Windows
®
Safari (macOS ), Chrome (Windows
Latest version or immediately previous major release
The Web page will appear.
User authentication may be required depending on the
settings of this machine. Check with the administrator
of this machine for information such as passwords
required for user authentication.
®
)
® ®
), Firefox (Windows ),
®
):