Casio QV-2000UX/Ir User Manual page 97

USB Port Connection
Computer
USB port
Large
IMPORTANT!
• Whenever connecting the USB cable to the camera,
make sure the arrow mark on the plug is aligned prop-
erly with the arrow mark on the side of the camera's
terminal.
• Plug the USB connectors into the ports as far as they
will go. Incorrect connection can result in improper op-
eration.
• Turn off the camera before connecting the USB cable
to it.
• The camera is not supplied power by the USB cable.
Be sure to use the optional AC adaptor to power the
camera whenever using a USB cable connection.
• Never disconnect the USB cable while a data commu-
nication operation is in progress. Doing so can corrupt
memory data.
CONNECTING TO OTHER EQUIPMENT CONNECTING TO OTHER EQUIPMENT
Small
USB cable
USB port
Data Transfer Cable Connection
You can use the Data Transfer Cable to connect to your per-
sonal computer through the camera's DIGITAL terminal.
Then you save images on your computer's hard disk using
the Photo Loader application.
• See the separate installation manual for information about
how to install Photo Loader on your computer.
Windows 95, 98, NT Workstation 4.0
The Data Transfer Cable can be connected to an IBM PC/AT
or compatible that is equipped with a D-Sub9 RS-232C ter-
minal.
RS-232C terminal
(D-Sub 9-pin)
E-97
Data Transfer
Cable
DIGITAL terminal