Casio QV-2000UX/Ir User Manual page 70

Turning power on default settings on and off
1.
Slide open the lens cover.
2.
Press MENU.
3.
Select "Options".
4.
Select "Mode 1" or "Mode 2".
5.
Select "Mode 1" or "Mode 2".
6.
Select the item whose setting you want to
change.
7.
Select "On" or "Off".
• Repeat steps 6 and 7 for other items if you want.
8.
Select "Exit".
OTHER RECORDING FUNCTIONS
Initializing Mode Memory
Use the following procedure to initialize the mode memory.
IMPORTANT!
Note that performing the following procedure to initialize
mode memory also initializes power save trigger time
settings (page E-40).
1.
Perform steps 1 through 3 under "Turning
power on default settings on and off".
• "Options" appears on the advanced menu only.
2.
Select "Power Save", "Mode 1" or "Mode 2".
3.
Select "Power Save", "Mode 1" or "Mode 2".
4.
Select "Restore".
• The following table shows the mode memory status of
5.
Select "Exit".
E-70
each item following the above procedure.