5.1.8.1.3. Service Position (3)
In Service Position (3), the DVD Decoder C.B.A. with Extension Cable (LSUA0034) X3 and
Connector Cable (IDE Cable) (Not supplied) can be peformed.
1. Remove the DVD Unit and the DVD Decoder C.B.A.
Note:
Remove the original Connector Cable (IDE) from the DVD Unit.
(The original Connector Cable (IDE) is not used in this position.)
2. Conect the Connector Cable (Power) and the Connector Cable
(IDE Cable) to the DVD Unit from the DVD Decoder C.B.A.
3. Connect the 3 Extension Cables as follows:
- With Extension Cable (LSUA0034): P8001 on the DVD
Decoder C.B.A. to P1501 on the Power Supply C.B.A.
- With Extension Cable (LSUA0034): P8002 on the DVD
Decoder C.B.A. to P4004 on the Main C.B.A.
- With Extension Cable (LSUA0034): P8003 on the DVD
Decoder C.B.A. to P6002 on the Main C.B.A.
Fig. 6-3-1
18