Smeg DR72IN Manual page 16

Time delay
With the "Time delay" function you can delay the
programme start up to 24 hours.
2. Set the drying programme and spin speed, and if
desired time delay. The time delay symbol will flash.
starts to count down. The Time delay symbol lights
up. Start symbol lights up.
flashing.
delay period. At the end of the time delay countdown
process, time delay symbol fades, drying process starts
and the programme duration is displayed. The time on the
display is the total of normal drying time and delay time.
Time delay is started by pressing the start/pause/cancel
Changing the delay time
cancel the programme. Time delay function must be
set again for the required time.
time delay.
lights up.
start flashing.
Canceling the time delay
cancel the programme.
desired programme.
Starting the programme
programme.
remaining time will continue flashing.
Progress of programme
The progress of a running programme is shown through a
number of symbols on the screen.
At the beginning of each programme step, the relevant
symbol in the series of symbols will light up and thus, all
symbols will remain lit up at the end of the programme.
The symbol that is lit up at the far right of the series of
symbols indicates the step that is being carried out.
"Drying":
ventilation.
"Iron Dry":
"Cupboard Dry":
Starts to illuminate when the drying degree reaches
"wardrobe dry" step, and remains illuminated until the
"Extra Dry":
Starts to illuminate when the drying degree reach to
C
Changing the programme after the
programme has started
You can use this feature to dry your laundry in a different
program after your machine has started to run.
3 seconds to "Cancel" the programme in order to select
program.
C
programme selection knob while your machine is
running, then the current program is cancelled and
new programme information is displayed.
16 EN