Installing The Application Software - Siemens SIMATIC S7-300 CPU Manual

6 Installation

6.3 Installing the application software

6.3 Installing the application software
This chapter describes the steps for the installation of the sample code.
The application software consists of a project with the following content:
device configuration
user program for the S7-CPU
configuration and settings of the SIMATIC Panel
The project is available as a zip-file on the HTML page from which you downloaded
this document.
Unzip the file "61450284_SITOP_Appl_S7-300_400_CODE_v10.zip" into a
separate directory. The project is then automatically unzipped with all respective
subdirectories.
Subsequently, you can open and edit the extracted project in STEP 7 /
WinCC V11 SP2.
Monitoring of 24 V load circuits
Entry-ID: 61450284, V1.1, 05/2014
43