Comtech EF Data FOB-21 Installation Manual

FOB-21
installation guide
We congratulate you on purchasing our company's fiber-optical patch panel FOB-21!
FOB-21 is the new generation patch panel whose construction incorporates various revolutionary technical
solutions. This patch-panel is produced from molten ABS plastic blocks which include all necessary optical
cable termination elements for cable fastening and adapter mounting. These new technical solutions enable
us to provide simple, highly integrated,
Like it is for all new and revolutionary products our offered patch-panel has its own specific installation terms.
Most of them will be familiar to experienced system installation technician. However we advise you to
carefully examine our installation guide step by step to ensure successful and qualitative installation.
WARNING !
There is an opening in each unit which
allows incoming cable to be lead trough
all units. Similar openings if required are
possible to make in the patch-panel's
backside.
In upper part of the panel optical welding
cassettes are placed, which includes place
for 12 weldings in each unit, altogether –
60 optical cable weldings in whole panel.
FOB-21 Installation guide
multy functional 19-inch patch-panel with relatively low costs.
Patch-panel FOB-21 is designed for 30 SC or LC connector installations.
It is possible to supply each one of the five units with incoming cable with
diameter up to 7mm using PG-9 type cable input, or with up to 12 mm thick
cable using plastic strips.
All patch-panel units are connected together.
Our patch-panel is designed only for 40 mm long
HSP (heat shrink protector) with 2.4
in melted state!
Different size HSP may not be suitable for placing in cassettes
Page 1
mm diameter
COMTECH ltd.
!